Adventure Gold Inc.: Meunier-144 Deep Drilling First Results-Lake Shore Gold Discovers Potential 1.9 Kilometre Down Plunge Extension of Timmins Mine Gold Mineralization

MONTREAL, QUEBEC -- (Marketwire) -- 11/10/11 -- Adventure Gold Inc. (TSX VENTURE: AGE) (the 'Company') and RT Minerals Corp. (TSX VENTURE: RTM) ('RTM') are pleased to report first results on the Meunier-144 joint venture property (the 'Property') deep drilling program. Lake Shore Gold Corp. (TSX: LSG)(NYSE Amex: LSG) ('Lake Shore Gold' or 'LSG') today announced first results from the Hole M-10-05b, (known as the 'Deep Hole'), which was designed to test the down plunge extension of the Timmins Mine and Thunder Creek ore bodies at vertical depths below 2,000 metres on the Property. All design and management of drilling for the program is being conducted by Lake Shore Gold. Highlights are:

--  'Deep Hole' (M-10-05b) intersects Ultramafic and Footwall style gold
    mineralization 2,380 metres below surface, representing potential 1.9
    kilometre down plunge extension from bottom of current reserve at the
    Timmins Mine and quadrupling of plunge length of high-grade Ultramafic
    Zone (see Figure 1 and 2)


--  Deep Hole reaches favourable Timmins Mine fold structure, multiple wedge
    cuts into core of fold nose planned by LSG


--  Deep Hole currently at 3,061 metre down hole depth, continues to test
    for Timmins Mine and Thunder Creek mineralization


--  Second zone of broad alteration, deformation and quartz veining,
    estimated to be 37 metres wide, identified from recently received drill
    core (currently being logged with sampling and assaying to follow - see
    Figure 3)


--  Potential to add significant new resources at Timmins West Complex with
    further drilling considered extremely high by LSG.

The Deep Hole targeted the Timmins Mine Fold Nose (TMFN), a folded mineralized structure which hosts the Ultramafic and Footwall zones and accounts for the bulk of existing resources above the 1,200 metre level. The Ultramafic Zone, the highest grade area of the Timmins deposit, typically occurs as a series of lenses hosted by pyroxenite situated in the core of the TMFN, while the Footwall Zone occurs within volcanic rocks, immediately north of the pyroxenite. The Deep Hole successfully intersected the pyroxenite, accompanied by typical Ultramafic and Footwall style mineralization, including carbonate alteration, quartz tourmaline veining, pyrite and elevated gold valueat the 2,380 metre level (2,925 metres down hole), approximately 1.9 kilometre down plunge from the bottom of the current reserve assuming the same 53 degree plunge observed near surface. Given that the Ultramafic Zone at Timmins Mine starts at about the 525 metre level, and assuming the same plunge, the intersection at 2,380 metres represents a potential quadrupling of the plunge length of the Ultramafic Zone. The best assay value obtained to date is 2 grams per tonne gold over 1.1 metres from a zone located at a down hole depth of 2,925 metres to the north and below the nose of the TMFN structure.

Tony Makuch, President and CEO of Lake Shore Gold, commented: 'We are extremely encouraged by the results of the Deep Hole. It is an incredible accomplishment by our exploration team that, through their analysis and calculations, they were able to model the extension of the Ultramafic structure almost two kilometres away and intersected the structure with the first hole. That is one hell of a stretch! Based on our interpretations, the results very clearly validate our exploration model, potentially quadruple the plunge length of the Ultramafic Zone and demonstrate an amazing down plunge continuity of the Timmins Mine gold system, which is a classic characteristic of the historic, long-life Timmins gold producers. We believe the same is true of Thunder Creek and will work towards showing this through continued drilling. We came in on the north limb of the TMFN and now plan to drill multiple wedge cuts into the nose of the fold structure, where the potential to intersect high-grade mineralization is considered greatest. Based on the results, we are very confident that, through additional work, we will be able to add significant new extensions to the mineralization at the Timmins West Complex. We are excited about the prospects for additional favourable results as we continue drilling the Deep Hole to further test both the Timmins Mine and Thunder Creek mineralization, complete the planned wedge cuts into the nose of the TMFN and undertake infill drilling between the new drill results and the bottom of our current reserve on the 1,200 Level at Timmins Mine.'

The Deep Hole drill program targets an area on property owned by a joint venture involving Lake Shore Gold, RT Minerals Corp. and Adventure Gold Inc. Based on current interpretations, the Deep Hole intersects the north limb of the TMFN structure slightly north of the boundary between the LSG/RTM/AGE JV property and 100% owned Lake Shore Gold property. The hole crosses the boundary onto the LSG/RTM/AGE JV property at 2,985 metres down hole with drilling continuing. The limb is identified on the basis of a prominent contact between pyroxenite and mafic volcanic rocks, which occurs at approximately 2,862 metres down hole. At present, the hole is still in progress and remains in pyroxenite at the current bottom which is 3,061 metres. Based on LSG projections, the nose of the TMFN structure may lie slightly to the south and near the 2,100 metre elevation on the current section line.

Observations from drill core also indicate moderate to strong alteration and between 2,828 metres and 2,928 metres (ie. approximately 100 metres wide) with several narrow syenite dikes, local quartz veinlets with tourmaline and sections containing between 1-8% pyrite. Results from this interval indicates anomalous gold values and a best assay value of 2 grams per tonne gold over 1.1 metres, from a down hole depth of 2,925 metres.

A second broad zone of alteration and deformation has been identified from recently received core, which also contains quartz veining, with tourmaline and locally elevated pyrite (see Figure 3). This core is now being logged and sampled. This lower zone occurs between 3,024 and 3,061 metres (ie., approximately 37 metres wide) and is still open to depth.

Current plans are to extend the current Deep Hole to a minimum down hole depth of 3,400 metres to allow a better overall understanding of both the Timmins Mine and Thunder Creek depth extensions. Following this, the plan is to complete a series of wedge cuts to better define the overall geometry of the structure at this elevation, as well as plan for new drilling up and down plunge to start defining new resources.

Figures 1, 2 and 3 are available at:

http://www.adventure-gold.com/common/documents/Meunier_Figure1_nov10_2011.pdf

http://www.adventure-gold.com/common/documents/Meunier_Figure2_nov10_2011.pdf

http://www.adventure-gold.com/common/documents/Meunier_Figure3_nov10_2011.pdf

Quality Control

Jules Riopel, P.Geo., Vice-President Exploration and Acquisitions, acting as the Company's 'Qualified Person' as defined by NI 43-101, has reviewed this press release. LSG is the field manager for the deep drilling program carried out on the Property. The Qualified Person ('QP') for Lake Shore Gold's Deep Hole drill program is Jacques Samson, P.Geo. who as QP has prepared or supervised the preparation of the scientific or technical information for the property and verified the data disclosed in this press release.

Lake Shore Gold has implemented a quality-control program to ensure best practice in the sampling and analysis of the drill core. Assays have been completed using a standard fire assay with a 30-gram aliquot. For samples that return a value greater than 10 grams per tonne gold, samples are re-run with a gravimetric finish. Zones with visible gold are tested by pulp metallic analysis. NQ size drill core is saw cut and half the drill core is sampled in standard intervals. The remaining half of the core is stored in a secure location. The drill core is transported in security-sealed bags for preparation at ALS Chemex Prep Lab located in Timmins, Ontario, and the pulps shipped to ALS Chemex Assay Laboratory in Vancouver, B.C. ALS Chemex is an ISO 9001-2000 registered laboratory preparing for ISO 17025 certification.

There is no guarantee that drill results reported in this news release will lead to the identification of resources that can be mined economically, and further work is required to identify resources and reserves.

Profile:

Adventure Gold Inc. is a mineral exploration company focused on discovering high-quality gold deposits in the Abitibi Greenstone Belt located in northwestern Quebec and northeastern Ontario - one of the richest gold deposit areas in the world. Adventure Gold holds quality assets in the Val-d'Or, Rouyn-Noranda and Timmins areas and is led by determined management and technical teams with extensive exploration and mine production experience. Adventure Gold is proud to count on highly regarded partners such as Agnico-Eagle Mines Limited and Lake Shore Gold Corp. to explore its advanced-stage gold properties.

Follow Adventure Gold on:

Twitter: http://twitter.com/Adventure_AGE

LinkedIn: http://www.linkedin.com/company/2253943

The foregoing information may contain forward-looking statements and events relating to the future performance of the Company. Forward-looking statements, specifically those concerning future performance, are subject to certain risks and uncertainties, and actual results may differ materially. These risks and uncertainties are detailed from time to time in the Company's filings with the appropriate regulatory authorities. We seek safe harbour.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contacts:

Marco Gagnon

President & CEO
marco@adventure-gold.com

450.743.5527
www.adventure-gold.com


Jules Riopel

Vice-President Exploration and Acquisitions
jules@adventure-gold.com

819.797.9770