Kiska Intersects 161 metres of 1.28 g/t gold-equivalent at Island Mountain Prospect, Whistler Project, Alaska

VANCOUVER, Oct. 6, 2011 - Kiska Metals Corporation ('Kiska' or 'the Company') reports further drill holes from Island Mountain at the Whistler Project, 160 km northwest of Anchorage, Alaska. Results include hole IM11-020 in the Breccia Zone, which averaged 1.28g/t gold-equivalent over 161 metres. This result from section 7,750N helps to define a zone of copper and gold mineralization that measures approximately 300 metres east-west and over 400 metres vertically. In addition, hole IM11-026, a further 100 metres north of IM11-020, returned an interval of 127.0 metres of 0.76 g/t gold-equivalent, indicating a potential transition to gold-dominant mineralization to the north in the breccia zones.


Island Mountain Breccia Zone Drilling

IM11-020 was collared at the same location as recently reported hole IM11-018, which intersected a broad interval of gold-copper mineralization (375 m averaging 0.42g/t gold, 1.50g/t silver and 0.07% copper, including 135 metres averaging 0.73g/t gold, 2.5g/t silver, 0.11% copper). IM11-20, drilled toward the east and beneath hole IM10-018 at an inclination of -62 degrees. The higher grade section of the hole (161 m averaging 1.00 g/t gold, 2.29 g/t silver and 0.12% copper or 1.28 g/t gold-equivalent) lies within a 344.0 m interval that averaged 0.56 g/t gold, 1.62 g/t silver and 0.08% copper, or 0.75 g/t gold-equivalent. Drilling on section 7,750N has now outlined mineralization approximately 300 metres in true width to a depth of 500 metres from surface.


Hole IM11-020 (Section 6,847,750 N, '7,750N')

     __________________________________________________
    |         |From | To  |Width| Au  | Ag  | Cu |Au Eq|
    |         | (m) | (m) | (m) |(g/t)|(g/t)|(%) |(g/t)|
    |_________|_____|_____|_____|_____|_____|____|_____|
    |IM11-020 |136.0|480.0|344.0|0.56 | 1.62|0.08|0.75 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |Including|180.0|439.0|259.0|0.71 | 1.87|0.10|0.94 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |Including|222.0|383.0|161.0|0.99 | 2.40|0.12|1.28 |
    |_________|_____|_____|_____|_____|_____|____|_____|

Gold equivalent calculations do not take into account metallurgical recoveries and are based on in ground metal using metal prices of $990 per ounce gold, $15.40 per ounce silver and $2.91 per pound copper.

Hole IM11-026 represents the first results from holes drilled on section 7,850N located 100 metre north of section 7,750N. Hole IM11-026 contained an upper interval that averaged 0.76 g/t gold-equivalent over 127.0 metres within a broad 257.0 metre zone that averaged 0.48 g/t gold-equivalent. This upper zone is associated with hydrothermal and igneous matrix breccias. Low grade intervals that averaged 0.24 g/t and 0.25 g/t gold over 42.5 and 54.0 metres, respectively, are associated with disseminated and vein pyrrhotite mineralization that persists to the east of the main breccia axis.


Hole IM11-026 (Section 6,847,850 N, '7,850N')

     __________________________________________________
    |         |From | To  |Width| Au  | Ag  | Cu |Au Eq|
    |         | (m) | (m) | (m) |(g/t)|(g/t)|(%) |(g/t)|
    |_________|_____|_____|_____|_____|_____|____|_____|
    |IM11-026 | 9.0 |266.0|257.0|0.45 | 0.57|0.01|0.48 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |Including|139.0|266.0|127.0|0.74 | 0.50|0.01|0.76 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |         |335.0|377.5|42.5 |0.24 | 0.50|0.04|0.32 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |         |491.0|545.0|54.0 |0.25 | 0.34|0.02|0.29 |
    |_________|_____|_____|_____|_____|_____|____|_____|

Gold equivalent calculations do not take into account metallurgical recoveries and are based on in ground metal using metal prices of $990 per ounce gold, $15.40 per ounce silver and $2.91 per pound copper.

Holes IM11-022 and IM11-024, both collared from the same location and 180 metres west of and beneath the discovery hole IM09-001 m (Section 7,650N) were to test for possible down dip continuation of the gold-copper bearing breccias and gold-bearing disseminated/vein pyrrhotite zones. Hole IM11-024 drilled at an inclination of -45 degrees intersected gold-bearing disseminated/vein pyrrhotite mineralization for much of its length including 101 metres averaging 0.61 g/t gold-equivalent, yet did not intersect significant widths of breccia. Hole IM11-022, inclined at -60 degrees, also failed to intersect significant widths of breccia with the bottom of the hole being dominated by a footwall section of hornfels sediments with minor vein pyrrhotite-pyrite mineralization, containing pervasive, low grade gold mineralization. These holes are interpreted to be beneath the steeply north-dipping southern contact of the main breccia body.


Hole IM11-022 (Section 6,847,650 N, '7,650N')

     __________________________________________________
    |         |From | To  |Width| Au  | Ag  | Cu |Au Eq|
    |         | (m) | (m) | (m) |(g/t)|(g/t)|(%) |(g/t)|
    |_________|_____|_____|_____|_____|_____|____|_____|
    |IM11-022 |205.0|238.1|33.1 |0.27 |0.60 |0.03|0.34 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |and      |286.0|328.0|42.0 |0.34 |0.44 |0.01|0.37 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |and      |506.0|533.0|27.0 |0.19 |1.22 |0.06|0.33 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |IM11-024 |15.0 |461.0|446.0|0.26 |0.82 |0.03|0.33 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |Including|184.0|247.8|63.8 |0.31 |0.43 |0.02|0.35 |
    |_________|_____|_____|_____|_____|_____|____|_____|
    |Including|357.0|458.0|101.0|0.55 |0.56 |0.03|0.61 |
    |_________|_____|_____|_____|_____|_____|____|_____|

Gold equivalent calculations do not take into account metallurgical recoveries and are based on in ground metal using metal prices of $990 per ounce gold, $15.40 per ounce silver and $2.91 per pound copper.

Results from holes on sections 7,600N, 7,650N (Holes IM11-22, 24), 7,750N (IM10-013, IM11-018, 020) and 7,850N suggest that the breccia zones and peripheral gold-bearing pyrrhotite zones are situated above a floor or footwall of hornfels sediments plunging shallowly to the north and that these gold-copper and gold zones may also plunge likewise to the north. Results from holes on section 7,750N (IM10-013, IM11-018, 020) demonstrate a strong gold-copper system that extends at least 100m south, whereas hole IM11-026 on section 7,850N indicates a transition to essentially gold-only mineralization in association with breccias to the north. By their nature breccias and structural gold systems can be expected to be irregular in form and because of this drilling is continuing, stepwise to the north, on approximate 50m sections.

'These results demonstrate a broad and deep gold-copper system that is impressive in its strength and complexity,' comments Mark Baknes, Vice President of Exploration for Kiska Metals. 'Island Mountain is emerging as a significant target at the Whistler Project.'

Kiska continues to expand beyond the 23 holes completed thus far with plans to continue with two drill rigs at Island Mountain as long as weather conditions allow. A total of 9,700 metres of drilling have been completed at Island Mountain, largely on east-west oriented drill sections spanning a north-south strike extent of approximately 700 metres. This area of focus is defined by expansive areas of gold-copper-bearing breccia-style and peripheral gold-bearing disseminated and vein pyrrhotite-style mineralization. Analytical results for up to 15 more holes are anticipated over the following weeks. Plan maps and cross sections can be found at http://www.kiskametals.com/s/Whistler.asp?ReportID=405126.

Click here to view plan maps and cross sections:
http://files.newswire.ca/901/kiska1006.pdf

In addition to the results pending from Island Mountain, complete assays have yet to be received for targets in the Whistler Orbit (Raintree West, North and South targets and the Rainmaker target) as well as three holes completed at the Muddy Creek target. Results are expected to be released in groups based on target areas.


Qualified Person Statement

The content of this release has been reviewed by Mr. Mark Baknes, M.Sc., P. Geo., VP Exploration of Kiska Metals. Mr. Baknes is a Qualified Person as defined under the terms of National Instrument 43-101.


About Kiska Metals Corporation

Kiska Metals Corporation is a mineral exploration company focused on advancing the Whistler property, Alaska, a district-scale project with excellent exploration potential which includes the Whistler Deposit (a 2.25 M oz gold-equivalent indicated resource of 79.2 million tonnes averaging 0.51 g/t gold, 1.97 g/t silver and 0.17% copper and a 3.35 M oz. gold equivalent inferred resource of 145.8 million tonnes averaging 0.40 g/t gold, 1.75 g/t silver and 0.15% copper). Kiska has renowned technical expertise and a quality exploration portfolio with numerous early stage exploration opportunities around the world, some held in partnership with a selection of the world's largest and most successful gold and base metal producers.


On behalf of Kiska Metals Corporation

'Jason Weber'
Jason Weber, P.Geo., President & CEO



CAUTIONARY STATEMENT: No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This News Release includes certain 'forward-looking statements'. Other than statements of historical fact, all statements included in this release, including, without limitation, statements regarding future plans and objectives of Kiska Metals Corporation, are forward-looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from Kiska's expectations are the risks detailed herein and from time to time in the filings made by Kiska Metals Corporation with securities regulators. Those filings can be found on the Internet at www.sedar.com and http://www.sec.gov/edgar.



CONTACT:

Kiska Metals Corporation
DREW MARTEL (INVESTOR RELATIONS) or JASON WEBER
575-510 BURRARD ST. VANCOUVER, BC, CANADA V6C 3A8
TEL: 604.669.6660
FAX: 604.669.0898
WWW.KISKAMETALS.COM