Superior Copper Corp.: 2013 Check Assays on Richards Breccia Confirm Continuity of Grade and Up to 1.67% Cu Over 27 Metres at the Coppercorp Project

TORONTO, Jul 24, 2013 - Superior Copper (TSX VENTURE:SPC) reports that check assays have been completed on well-preserved half core segments of three BQ drill holes completed by Aurogin Resources in 1997 and 1998 on the Richards Breccia Copper Prospect, Ryan Township, Sault Ste. Marie Mining Division. The Richards Breccia is located approximately 10 km northeast of the Coppercorp Mine on the recently acquired Jogran Property (see news release April 10, 2013). The Richards Breccia Prospect consists of a near vertically plunging breccia pipe with a surface diameter of 40 metres and a known depth of 75 metres. The vertical extent remains open and the company believes there is good exploration potential below the historic drill holes. The breccia pipe is considered to be Keweenawan in age, similar to the Coppercorp and Tribag Mines, and intrudes Archean rocks of the Batchawana Greenstone Belt.

The 2013 check assays resulted in slightly higher composite weighted averages for copper and similar averages for gold and silver compared to historical assays. The check assays also reproduced the positive linear correlation between gold, silver and copper. The most significant results came from AR97-25 with 1.13% Cu, 0.11 g/t Au, and 4.1 g/t Ag over 31.3 metres, and AR98-07 with 1.67% Cu, 0.15 g/t Au, and 5.5 g/t Ag over 26.85 metres. Please note that these are apparent widths.

	Aurogin Resources Ltd (1997-98)						Superior Copper Corporation
	Composite Assays 1997-98: Swastika/TSL Labs						Composite Assays 2013: AGAT Labs
	(BQ Half Core)						(BQ Quarter Core)
DDHID	From	To	Length (m)	Cu (%)	Ag (ppm)	Au (ppb)	Cu %	Ag ppm	Au_ppb
AR97-24	55.25	68.95	13.70	0.67	-	62	0.62	1.9	68
AR97-25	42.50	83.00	40.50	0.86	3.5	91	0.94	3.3	92
including	42.50	73.80	31.30	0.97	4.1	110	1.13	4.1	111
AR98-07	36.45	63.3	26.85	1.46	3.8	169	1.64	5.5	151

To see the map associated with this release, please select the following link:
http://media3.marketwire.com/docs/spc.jpg

The copper mineralization is primarily chalcopyrite contained in the matrix between fragments and along fractures. Chalcopyrite is accompanied by pyrite, quartz, biotite, and rock flour. Breccia fragments commonly range in size from less than 1 cm up to 5 cm in a fine grained matrix.

The 1997 and 1998 assays were completed by Swastika and TSL Labs for Aurogin Resources using ICAP Plasma Scan (ICP-OES) for multi-element analysis and fire assay for gold. The 1997 half core sample locations were measured based on the original drill logs and verified where original sample tags were present in the core box. The half cores were carefully quartered and sampled at similar sample spacing as the original samples. Quartered samples were then placed in plastic sample bags with identifying AGAT Labs tags and sealed with a plastic tie. The magnetic susceptibility, carbonate content, and percentage of sulphide minerals were noted in the sample log. In addition, missing or lost sections of drill core were estimated for each box. AR97-25 and AR98-07 had less than 2% missing core sections; AR97-24 had a 22% loss of core between 47 to 64.5 metres. The historical geological logs were reviewed and compared with the drill core and deemed to be acceptable. Samples were placed in rice bags and shipped to AGAT Labs by bus.

AGAT Labs completed multi-element analyses on all samples using Aqua Regia digestion followed by ICP-OES finish. Gold was analysed using a fire assay with ICP-OES finish. Any Au assays greater than 10 g/t was re-assayed by FA-Gravimetric. Silver greater than 100 g/t were re-assayed by FA- Gravimetric finish. Copper greater than 1% was re-assayed by ICP-OES.

The Richards Breccia diatreme intrudes approximately 1 km southwest of the Jogran Porphyry, a Keweenawan age mineralized porphyry containing Cu and Mo which is also on the Jogran Property. The regional area is characterized by extensive fracturing and veining containing chalcopyrite, pyrite and molybdenite along with quartz, carbonate, biotite and chlorite. A 3000 metre drill program is currently proposed for Richards Breccia and Jogran Porphyry Prospects.

Detailed drill hole and check assay information is available at: www.superiorcopper.ca.

The technical information contained in this news release has been reviewed by Delio Tortosa, P.Eng. who is a "Qualified Person" under National Instrument 43-101.


Superior Copper Corporation

Superior Copper Corp. is a Canadian-based exploration company focused on base and precious metal exploration. The Company's primary objective is to target highly prospective and underexplored mineral properties, particularly copper, in order to meet the increasing global demand. The Company has two key exploration projects; the Batchawana Copper Project and the Rivière Doré Project in Quebec.


CAUTIONARY STATEMENT: Neither TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release. This News Release includes certain "forward-looking statements". These statements are based on information currently available to the Company and the Company provides no assurance that actual results will meet management's expectations. Forward-looking statements include estimates and statements that describe the Company's future plans, objectives or goals, including words to the effect that the Company or management expects a stated condition or result to occur. Forward-looking statements may be identified by such terms as "believes", "anticipates", "expects", "estimates", "may", "could", "would", "will", or "plan". Since forward-looking statements are based on assumptions and address future events and conditions, by their very nature they involve inherent risks and uncertainties. Actual results relating to, among other things, results of exploration, project development, reclamation and capital costs of the Company's mineral properties, and the Company's financial condition and prospects, could differ materially from those currently anticipated in such statements for many reasons such as: changes in general economic conditions and conditions in the financial markets; changes in demand and prices for minerals; litigation, legislative, environmental and other judicial, regulatory, political and competitive developments; technological and operational difficulties encountered in connection with the activities of the Company; and other matters discussed in this news release. This list is not exhaustive of the factors that may affect any of the Company's forward-looking statements. These and other factors should be considered carefully and readers should not place undue reliance on the Company's forward-looking statements. The Company does not undertake to update any forward-looking statement that may be made from time to time by the Company or on its behalf, except in accordance with applicable securities laws. Please see our public filings at www.sedar.com for further information.



Contact

Superior Copper Corporation
Judy Baker, CEO
416.479.0893 Ext 401
jbaker@superiorcopper.ca

Superior Copper Corp.
Morgan Quinn, VP Corporate Development
416.479.0893 Ext 403
mquinn@superiorcopper.ca