Suche
 
Folgen Sie uns auf:

GoldQuest Releases Drill Results and Exploration Update at Tireo Project in the San Juan District, Dominican Republic

31.07.2014  |  Marketwired

VANCOUVER, BC--(Marketwired - July 31, 2014) - GoldQuest Mining Corp. (TSX VENTURE: GQC)(FRANKFURT: M1W)(BERLIN: M1W) ("GoldQuest" or the "Company") is pleased to announce an exploration update including assay results from four holes from its ongoing drill program which commenced May 2014 on its 100% owned San Juan concession group in the Dominican Republic, which includes the Romero gold/copper deposit (see press release dated October 29, 2013). Drilling is underway at a porphyry target at La Guama North, and the larger La Bestia target will be drilled shortly. The updated map can be found here: http://www.goldquestcorp.com/images/maps/GQC_IPMap-Targets-July312014a.pdf

Assays have been received for four holes, LTP 158,159,160 and LTP-161. A further two holes, LTP 162 and 163 have been completed with assays pending and LTP 164 is in progress. LTP 158, LTP 160 and LTP-161 were drilled between the Romero and Romero South deposit, and all three holes terminated above or adjacent to the target zone and LTP 159 was drilled to the east of Romero South All holes were within the alteration halo consistent with Romero style hydrothermal systems. No significant intersections have been encountered to date and more ground geophysics is required on the root zone which extends to the south and outside of the current ground IP coverage.

"The drilling reported today was seeking to link the Romero and Romero South mineralizations," commented Julio Espaillat, GoldQuest's CEO, "The results indicate that any gold and/or copper mineralization is likely to be encountered at deeper or adjacent locations as the alteration seen in the drill core is consistent with being a lower temperature and pressure than the conditions required to deposit gold and copper in a Romero type system. The drill program is now focusing on shallower targets to the north and west of Romero."

Hole ID From (m) To (m) Interval (m) Gold g/t Uncut Zn_%
LTP-158 33.53 37.00 3.47 1.59 -
40.50 46.00 5.50 0.26 -
173.00 177.00 4.00 0.19 -
299.0 303.0 4.00 0.18 -
LTP-159 162.00 168.50 6.50 0.18 -
505.00 509.00 4.00 0.46 -
LTP-160 32.00 52.00 20.00 0.38 0.17
122.00 156.00 34.00 0.24 0.07
192.02 220.00 27.98 0.21 0.40
258.00 310.00 52.00 0.26 0.17
LTP-161 Not significant interceptions

The results and sub intervals summarized in the table above have a bottom cut-off of 0.15 g/t of gold. A top cut of 50 g/t gold is used, however no samples in this release exceeded 50 g/t. The intervals may not represent true mineralization widths and the exact orientation of the mineralization at this stage of the drilling is not yet known, although the host volcanic lithologies are sub-horizontal in orientation.

LTP-158 - Intersected pervasive pyrite mineralization with patchy weak gold, copper and zinc. Detailed thin sections revealed the hole intersected the upper part of hydrothermal system and that stronger potential remains below. The hole was stopped short of the target depth due to a combination of drill capacity and a large fault zone. Additional deeper drilling will be considered at a later date once stronger near surface targets have been drilled.

LTP-159 - Targeted a previously unidentified deep root zone to the Romero South mineralization. The drilling encountered alteration and pyrite mineralization associated with weak gold, copper and zinc. Drilling confirmed the anticipated alteration system at a depth of 500 metres and to the east of the deposit, as identified in the airborne ZTEM survey, encountering two weakly mineralized zones where both the upper and deeper zone matched the targets. The ZTEM conductive anomaly continues for several kilometres to the south and additional drilling will be considered once the area has been covered with ground IP geophysics.

LTP-160 - Intersected similar results as LTP-158 and also appears to be in the upper part of the targeted hydrothermal system. The hole did not reach the targeted depth due to a combination of drill capacity and a large fault zone. Additional deeper drilling will be considered at a later date once stronger near surface targets have been drilled.

LTP-161 - Did not intersect significant mineralization and the hole is above and too far east of the desired core of the hydrothermal system. 

Exploration Update

The complete San Juan property has been flown with airborne magnetics and electro magnetics (EM) by Geotech Geophysics in February and March 2014, the first ever comprehensive airborne survey done in the district. Favorable exploration areas identified from the airborne magnetics and EM are focused on with our comprehensive ground program. The ground program involves detailed mapping and deep penetrating ground IP by Insight Geophysics. In recent weeks we have identified a new chargeable anomaly 7 kilometers north-west of the Romero Targets and to the north of the current drilling at North Guama, which the Company expects will be drilled in due course.

This new anomaly, named La Bestia, has similar geophysical characteristics to Romero, and surface mapping and sampling have been encouraging. Argillic alteration with zones of intense silicification has been traced extensively at surface and is coincident with the anomaly. Regional reconnaissance in 2013, following the Romero discovery, identified mineralized quartz veins at the north-east limit of the anomaly.

The individual assay intervals from holes LTP-01 through LTP-161 can be reviewed on GoldQuest's website at the following link: http://www.goldquestcorp.com/images/spreadsheets/GoldQuest_AssaysJuly312014.xls 

The collar locations and hole azimuth and dips can be reviewed at: http://www.goldquestcorp.com/images/spreadsheets/GoldQuest_HoleLocationsJuly312014.xls

Geological Model

The geological interpretation of the mineralization found at the Romero Project is an intermediate epithermal sulphidation system, which preferentially occurs in the flat lying dacite unit. Generally the lower contact of the dacite unit is more strongly mineralized and the highest gold and copper values occur towards the centre of the mineralized body, with a gold+zinc zone followed by a pyrite halo marking the outer periphery.

Dr. Richard H. Sillitoe, one of the world's leading experts in epithermal and porphyry deposits, recently visited the Company's Las Tres Palmas project and noted, "Much of the previously defined mineralization in the Hondo Valle and Escandalosa sectors, south along the mineralized trend from Romero, displays this distal gold-zinc association, suggesting that additional, proximal, copper-rich centres may exist."

The Company continues to expand the coverage of ground IP geophysics which has been successful at identifying sulphide mineralization and which led to the discovery of Romero. To date ground IP geophysics have been completed over an area of 4,300 hectares, representing less than 25% of the concession areas held or under application by GoldQuest.

The Company will continue to release new drill hole results in batches as their analysis is completed. ACME Labs have been instructed to release assays to the Company only once the batches have been completed.

As part of the Company's Quality Assurance and Quality Control procedures (QA/QC), most of the high grade intervals are re-assayed and the Company is awaiting these check samples. In addition, systematic re-assaying of intervals is in progress, to confirm compliance of blanks and duplicates checks. The Company also reviews results from Certified Standard Reference materials (CRSM or Standards), which are inserted at a rate of 5 per 100 samples. Within the results disclosed herein there were 2 samples which had results below, and 1 sample above the recommended tolerances for copper. The samples were outside of significant mineralized intervals and the batches will not be re-assayed.

In GoldQuest's drill programs, composite intervals were chosen using a combination of geological criteria and mineralization, averaging around 2 metres core length. The drill core is cut in half with one half of the core sample shipped to ACME Labs by GoldQuest technicians. The remaining half of the core is kept at the company core shack for future assay verification, or any other further investigation. Assays within intervals below the 0.005 g/t detection limit for Au were given a zero value. All drill samples were prepared and screened by ACME Labs (Santo Domingo); metallic fire assay and multi-element ICP-MS were assayed by ACME Analytical Laboratories (Chile). Gold values are determined by standard fire assay with an AA finish, or, if over 10.0 g/t Au, were re-assayed and completed with a gravimetric finish. QA/QC included the insertion and continual monitoring of numerous standards, blanks and duplicates into the sample stream, at random intervals within each batch. The comprehensive GoldQuest Quality Assurance and Quality Control protocols can be viewed on GoldQuest's website at: http://www.goldquestcorp.com/index.php/corporate/corporate-governance.

The information in this press release has been reviewed and approved by Mr. Jeremy Niemi, P. Geo., Vice President, Exploration of GoldQuest and a Qualified Person for the technical information in this press release under NI 43-101 standards.

About GoldQuest

GoldQuest is a Canadian-based mineral exploration company with projects in the Dominican Republic traded on the TSX-V under the symbol GQC.V and in Frankfurt/Berlin with symbol M1W, with 145,755,044 shares outstanding (159,331,209 on a fully diluted basis), as at July 31, 2014.

Forward-looking statements:

This news release contains certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical fact, that address events or developments that GoldQuest expects to occur, are forward-looking statements.

Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects", "plans", "anticipates", "believes", "intends", "estimates", "projects", "potential", "indicate" and similar expressions, or that events or conditions "will", "would", "may", "could" or "should" occur. Although GoldQuest believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results may differ materially from those in forward-looking statements. Factors that could cause the actual results to differ materially from those in forward-looking statements include exploitation and exploration success, differing results from re-assays or other analytical procedures with respect to the drill results, continued availability of capital, financing and required resources (such as human resources, equipment and/or other capital resources) and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and actual results or developments may differ materially from those projected in the forward-looking statements. Forward-looking statements are based on the beliefs, estimates and opinions of GoldQuest's management on the date the statements are made. GoldQuest undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change, except as required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.



Contact

GoldQuest Mining Corp.
Julio Espaillat
President & Chief Executive Officer
+1-829-919-8701
jespaillat@goldquestcorp.com

GoldQuest Mining Corp.
Bill Fisher
Chairman - Toronto
+1-647-271-4505
bfisher@goldquestcorp.com
www.goldquestcorp.com


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
GoldQuest Mining Corp.
Bergbau
A0B7D8
CA38144C1005
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"