Ultra Lithium Intersects Up to 270 ppm Lithium in Drill Core Samples at Big Smoky Valley Brine Lithium Project in Nevada
VANCOUVER, BRITISH COLUMBIA--(Marketwired - July 7, 2016) -
THIS NEWS RELEASE IS NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES FOR DISSEMINATION IN THE UNITED STATES
Ultra Lithium Inc. (TSX VENTURE:ULI) ("Ultra Lithium" or "the Company") is pleased to announce drill core assay results from the first drill hole at its 100% owned South Big Smokey Valley brine lithium project located in Nevada.
The results of 22 drill core samples from the hole BSH16-01 indicate maximum values for lithium of 270 parts per million (ppm), boron 410 ppm, potassium 10,000 ppm, and magnesium 12,000 ppm; and the average concentration is lithium 131 ppm, boron 151 ppm, potassium 5,575 ppm, and magnesium 6,210 ppm. One sample from a 10 cm gypsum layer had lithium values below labs detection limits. These samples were taken at various depth intervals down to 1,000 feet (305 metres) below ground surface(See table for details). The Company is in the process of collecting brine water samples from this hole.
The Company is also pleased to announce that it has signed a new drill contract with Boart Longyear to finish the remaining planned exploratory drilling at the South Big Smoky brine lithium project.
Dr. Weiguo Lang, CEO of Ultra, stated that, "The core sampling of the first hole not only provided positive results but also gave valuable information regarding subsurface lithology and hydrogeological conditions. We are pleased to have an experienced drill contractor to finish this challenging drill job in soft lake sediments. With Boart Longyear's drilling experience and organizational capabilities, the Company is expecting to obtain groundwater samples of the potential deeper brine targets by drilling down to 2,200 feet below surface in the next hole."
Quality Assurance and Quality Control
All the samples were shipped to Western Environmental Testing Laboratory in Sparks, Nevada, which is an US EPA accredited independent laboratory. The samples were analyzed for lithium, potassium, boron, and magnesium using Test Methods for Evaluation of Solid Waste, Physical/Chemical Methods (SW846), Third Edition. Laboratory used its own quality control and quality assurance protocols for sample analysis.
Qualified Person
The technical information contained in this news release has been reviewed and approved by Afzaal Pirzada, P.Geo., a qualified person, as defined by NI 43-101 who works as a consultant with the Company.
ON BEHALF OF THE BOARD OF DIRECTORS
Kiki Smith, CFO
About Ultra Lithium Inc.
Ultra Lithium is an exploration and development company with a focus on the acquisition and development of lithium assets. The Company is currently focused on North American acquisitions and exploring its Big Smoky Valley Project located in Nevada, USA.
About the South Big Smokey Valley Brine Lithium Project:
The Company holds a 100% interest in the Big Smoky Valley Project comprising 659 placer claims covering approximately 13,000 acres' land located in Nevada, USA. This Project has geological conditions favourable for hosting Lithium enriched brines. The Project is located 16 miles to the north of Albemarle Corp.'s Silver Peak mine which is the only brine lithium producing project in North America, and has been producing lithium from brines since 1966. The Company has completed a ground CSAMT geophysical survey and surface sediment / water sampling programs on the project and started drilling in 2016.
View the Company's filings at www.SEDAR.com.
| BSH16-01: Core samples assay results | ||||||||||||||
| Sample ID | Depth | Depth | Lithology | Li | K | B | Mg | |||||||
| feet | meters | ppm | ppm | ppm | ppm | |||||||||
| BSH16-01-50'S | 50 | 15.24 | Light brown SILTY CLAY, medium plastic, damp, silt patches | 100 | 7100 | 250 | 8300 | |||||||
| BSH16-01-75'S | 75 | 22.86 | Black SHALE with organic matter, peat like appearance, damp | 86 | 7000 | 230 | 7700 | |||||||
| BSH16-01-104'S | 104 | 31.70 | Greenish grey SILTY CLAY, plastic, volcanic nature, wet | 96 | 7800 | 320 | 8600 | |||||||
| BSH16-01-154'S | 154 | 46.94 | Greenish grey SILTY CLAY, plastic, volcanic nature, damp, more greenish at the in some sections, chloritic, peat bog odour and mixing of organic matter at places | 250 | 9600 | 410 | 9400 | |||||||
| BSH16-01 204'S | 204 | 62.18 | Greenish grey SILTY CLAY, plastic, volcanic nature, wet, more greenish in this part due to more chlorite, mixing of organic matter | 190 | 8700 | 320 | 8800 | |||||||
| BSH16-01 254'S | 254 | 77.42 | Greenish grey to dark black SILTY CLAY, volcanic, plastic, damp, some black organic matter | 270 | 10000 | 330 | 12000 | |||||||
| BSH16-01-300'S | 300 | 91.44 | Greenish grey to dark grey and black SILTY CLAY, with organic matter, damp, medium plastic | 120 | 6700 | 190 | 7000 | |||||||
| BSH16-01-349'S | 349 | 106.37 | Greenish grey CLAYEY SILT, with some fine grey sand patches, damp to wet | 190 | 7000 | 140 | 7700 | |||||||
| BSH16-01-354'S | 354 | 107.89 | Same as above | 40 | 1500 | 27 | 1600 | |||||||
| BSH16-01-435'S | 435 | 132.58 | Light grey SAND, medium to coarse grained, quartzitic, rounded to sub rounded to rounded grains, damp to wet, pores are filled with drilling mud showing loose sand dilution, rock fragments including clay, chert, amphibole, limestoneand igneous (quartz 50%, rockfragments 20%, 30% voids filled with drilling fluids and clay cement) | 24 | 1300 | 23 | 1400 | |||||||
| BSH16-01-453'S | 453 | 138.07 | Same as above | 24 | 1100 | 17 | 1200 | |||||||
| BSH16-01-459'S | 459 | 139.90 | Same as above | 36 | 1300 | 19 | 1900 | |||||||
| BSH16-01-500'S | 500 | 152.39 | Light grey TUFF, with volcanic ash material, silty, contains <cm to 1cm rock fragments, wet moist, irritatting to hands, bottom 6" more clayey with <1" salt/gypsum layer | 250 | 8200 | 120 | 10000 | |||||||
| BSH16-01-554'S | 554 | 168.85 | Brownish to grey SILTY CLAY, medium plastic damp, more silty at places | 260 | 9200 | 190 | 12000 | |||||||
| BSH16-01-576'S | 576 | 175.56 | Brown and grey SILTSTONE/CLAY, volcanic, core loss in some sandy parts | 210 | 7600 | 130 | 10000 | |||||||
| BSH16-01-710'S | 710 | 216.40 | A 3 inch layer of GYPSUM at 710' within grey silty sand, white powdry, damp | 0 | 540 | 13 | 130 | |||||||
| BSH16-01-719'S | 719 | 219.14 | Grey to greenish grey SILTY CLAY, medium plastic, damp, turns into silt at the bottom | 140 | 7000 | 89 | 7700 | |||||||
| BSH16-01-730'S | 730 | 222.49 | Grey SAND, fine to medium grained, quartzitic, with 30% rock fragments, interstices are filled with drilling mud, wet, sub rounded to sub angular grains are bind by fluids | 44 | 2200 | 25 | 2000 | |||||||
| BSH16-01-801'S | 801 | 244.13 | Greenish grey SILTY CLAY, volcanic, plastic, damp, some parts are whitish, bentonitic | 240 | 9300 | 200 | 9100 | |||||||
| BSH16-01-887'S | 887 | 270.34 | Light greenish grey TUFF, coarse quartz, amphibole and, chert, clay and other fragments, thin salt layers at places | 130 | 4300 | 110 | 4100 | |||||||
| BSH16-01-952.5'S | 952.5 | 290.31 | SILTY SAND, fine grained, with clay and salt matrix, 3" of gypsum layer at 952.5' (Sample) | 92 | 2600 | 89 | 3000 | |||||||
| BSH16-01-1000'S | 1000 | 304.79 | SILTY SAND, fine grained, with clay and salt matrix, 3" of gypsum layer at 952.5' (Sample) | 92 | 2600 | 89 | 3000 | |||||||
| Average | 131 | 5575 | 151 | 6210 | ||||||||||
Contact
Ultra Lithium Inc.
Kiki Smith
778 968-1176
604 909-4682
kiki@ultralithium.com
www.ultralithium.com
