Nemaska Lithium Reports Drill Results to Date on Whabouchi Lithium Project
![Nemaska Lithium Reports Drill Results to Date on Whabouchi Lithium Project](https://www.goldseiten.de/media/goldseiten-news.jpg)
QUEBEC CITY, QUEBEC--(Marketwired - Oct 13, 2016) - Nemaska Lithium Inc. ("Nemaska Lithium" or the "Corporation") (TSX:NMX)(OTC:NMKEF) is pleased to provide an update on the assay results received to date from the previously announced definition drilling campaign for its Whabouchi lithium project. The 50 drill holes (17,400m) program was concluded on September 16, 2016. A total of 3,908 drill holes samples (3,897m) were taken from the different Spodumene bearing pegmatites intervals encountered during the drilling campaign.
So far, the assay results received cover 70% (19 holes on a total of 27 holes) of the 2016 drilling conducted between sections 05+00E and 14+50E (see Figure plan map).
The drilling assays currently available enable Nemaska Lithium to confirm the successful completion of the objectives stated at the beginning of the program:
- The potential conversion of 4.69 Mt of inferred resources, inside pit design is well underway. 70% of the drill holes assays were received East of section 05+00E and all the results confirm the continuity of the mineralization inside the limits of the optimized resources pit shell (see section 07+50E and 09+75E);
- The current results also indicate the potential to increase the level of confidence of mineral resources between 0 m and 200 m vertical from the surface, East of section 05+50E. All the assays currently received demonstrate the continuity of the mineralized dykes down to 200m and in some cases even down to 300m below the surface (see section 12+00E and 13+00E);
- At the moment, no assay results for the deep extension holes have been received. The lithological observations confirm the continuity of the longitudinal zone of mineral resources down to 500 m vertical depth on all the sections West of section 12+50E.
- No assay results have been received yet for the new Doris zone, which has been discovered to the southeast of the main zone.
"This drill program is accretive to our existing mineral resources. Objectives 1 and 2 of the drilling program above were designed to increase our resources/reserves in the future open pit mine. Drill results reported to date have accomplished this. By upgrading the inferred resource we will now be able to include material previously calculated as waste rock as mineralized material. Likewise the expansion of the mineralized zone down to 300 m will allow us to add additional material to our resource. I am keen to see the results from the Doris zone as this has the potential to increase the size of the pit shell. Ultimately this drill program has been a complete success and I believe our goals of lowering our already low cost of concentrate while increasing the mine life and mine production rate are achievable," commented Guy Bourassa, President and CEO of Nemaska Lithium.
Table with assay results from illustrated sections:
Section | Hole Name | From (m) | To (m) | Core length (m) | Li2O (%) | Interval Average Li2O (%) | Interval Core Length (m) | Estimated True Width (m) |
09+75E | WHA-16-156 | 204.8 | 205.9 | 1.1 | 1.38 | 1.05 | 3.7 | 2.6 |
09+75E | WHA-16-156 | 205.9 | 206.9 | 1.0 | 1.16 | |||
09+75E | WHA-16-156 | 206.9 | 207.9 | 1.0 | 0.65 | |||
09+75E | WHA-16-156 | 207.9 | 208.5 | 0.6 | 0.93 | |||
09+75E | WHA-16-156 | 221.7 | 222.7 | 1.0 | 1.08 | 1.14 | 8.0 | 5.7 |
09+75E | WHA-16-156 | 222.7 | 223.7 | 1.0 | 0.56 | |||
09+75E | WHA-16-156 | 223.7 | 224.7 | 1.0 | 0.34 | |||
09+75E | WHA-16-156 | 224.7 | 225.7 | 1.0 | 0.56 | |||
09+75E | WHA-16-156 | 225.7 | 226.7 | 1.0 | 2.56 | |||
09+75E | WHA-16-156 | 226.7 | 227.7 | 1.0 | 1.51 | |||
09+75E | WHA-16-156 | 227.7 | 228.7 | 1.0 | 0.88 | |||
09+75E | WHA-16-156 | 228.7 | 229.7 | 1.0 | 1.61 | |||
09+75E | WHA-16-156 | 241.6 | 242.6 | 1.0 | 1.25 | 1.64 | 11.9 | 13.9 |
09+75E | WHA-16-156 | 242.6 | 243.6 | 1.0 | 1.10 | |||
09+75E | WHA-16-156 | 243.6 | 244.6 | 1.0 | 1.68 | |||
09+75E | WHA-16-156 | 244.6 | 245.6 | 1.0 | 2.41 | |||
09+75E | WHA-16-156 | 245.6 | 246.6 | 1.0 | 1.31 | |||
09+75E | WHA-16-156 | 246.6 | 247.6 | 1.0 | 1.27 | |||
09+75E | WHA-16-156 | 247.6 | 248.6 | 1.0 | 1.72 | |||
09+75E | WHA-16-156 | 248.6 | 249.6 | 1.0 | 1.68 | |||
09+75E | WHA-16-156 | 249.6 | 250.6 | 1.0 | 2.07 | |||
09+75E | WHA-16-156 | 250.6 | 251.6 | 1.0 | 2.13 | |||
09+75E | WHA-16-156 | 251.6 | 252.6 | 1.0 | 1.51 | |||
09+75E | WHA-16-156 | 252.6 | 253.4 | 0.9 | 1.51 | |||
12+00E | WHA-16-160 | 239.5 | 240.5 | 1.0 | 1.92 | 1.44 | 4.6 | 3.3 |
12+00E | WHA-16-160 | 240.5 | 241.5 | 1.0 | 1.16 | |||
12+00E | WHA-16-160 | 241.5 | 242.5 | 1.0 | 1.14 | |||
12+00E | WHA-16-160 | 242.5 | 243.3 | 0.8 | 1.36 | |||
12+00E | WHA-16-160 | 243.3 | 244.1 | 0.8 | 1.66 | |||
12+00E | WHA-16-160 | 247.9 | 249.0 | 1.1 | 1.10 | 1.09 | 6.0 | 4.3 |
12+00E | WHA-16-160 | 249.0 | 250.0 | 1.0 | 0.97 | |||
12+00E | WHA-16-160 | 250.0 | 251.0 | 1.0 | 0.99 | |||
12+00E | WHA-16-160 | 251.0 | 252.0 | 1.0 | 1.21 | |||
12+00E | WHA-16-160 | 252.0 | 253.0 | 1.0 | 1.10 | |||
12+00E | WHA-16-160 | 253.0 | 253.9 | 0.9 | 1.16 | |||
12+00E | WHA-16-161 | 57.5 | 58.5 | 1.0 | 1.74 | 1.96 | 7.5 | 5.3 |
12+00E | WHA-16-161 | 58.5 | 59.5 | 1.0 | 3.40 | |||
12+00E | WHA-16-161 | 59.5 | 60.5 | 1.0 | 1.98 | |||
12+00E | WHA-16-161 | 60.5 | 61.5 | 1.0 | 0.82 | |||
12+00E | WHA-16-161 | 61.5 | 62.5 | 1.0 | 0.86 | |||
12+00E | WHA-16-161 | 62.5 | 63.5 | 1.0 | 2.45 | |||
12+00E | WHA-16-161 | 63.5 | 64.0 | 0.5 | 2.97 | |||
12+00E | WHA-16-161 | 64.0 | 65.0 | 1.0 | 1.92 | |||
12+00E | WHA-16-161 | 86.5 | 87.5 | 1.0 | 1.57 | 2.05 | 18.4 | 13.0 |
12+00E | WHA-16-161 | 87.5 | 88.5 | 1.0 | 1.38 | |||
12+00E | WHA-16-161 | 88.5 | 89.5 | 1.0 | 1.57 | |||
12+00E | WHA-16-161 | 89.5 | 90.5 | 1.0 | 1.40 | |||
12+00E | WHA-16-161 | 90.5 | 91.5 | 1.0 | 1.57 | |||
12+00E | WHA-16-161 | 91.5 | 92.5 | 1.0 | 1.03 | |||
12+00E | WHA-16-161 | 92.5 | 93.5 | 1.0 | 0.73 | |||
12+00E | WHA-16-161 | 93.5 | 94.5 | 1.0 | 1.64 | |||
12+00E | WHA-16-161 | 94.5 | 95.5 | 1.0 | 2.76 | |||
12+00E | WHA-16-161 | 95.5 | 96.5 | 1.0 | 3.75 | |||
12+00E | WHA-16-161 | 96.5 | 97.5 | 1.0 | 3.53 | |||
12+00E | WHA-16-161 | 97.5 | 98.5 | 1.0 | 2.26 | |||
12+00E | WHA-16-161 | 98.5 | 99.5 | 1.0 | 1.79 | |||
12+00E | WHA-16-161 | 99.5 | 100.5 | 1.0 | 2.24 | |||
12+00E | WHA-16-161 | 100.5 | 101.5 | 1.0 | 2.35 | |||
12+00E | WHA-16-161 | 101.5 | 102.5 | 1.0 | 2.76 | |||
12+00E | WHA-16-161 | 102.5 | 103.5 | 1.0 | 2.37 | |||
12+00E | WHA-16-161 | 103.5 | 104.3 | 0.8 | 2.17 | |||
12+00E | WHA-16-161 | 104.3 | 104.9 | 0.6 | 2.17 | |||
12+00E | WHA-16-161 | 198.0 | 199.0 | 1.0 | 1.29 | 1.47 | 15.2 | 10.7 |
12+00E | WHA-16-161 | 199.0 | 200.0 | 1.0 | 1.14 | |||
12+00E | WHA-16-161 | 200.0 | 201.0 | 1.0 | 0.54 | |||
12+00E | WHA-16-161 | 201.0 | 202.0 | 1.0 | 1.18 | |||
12+00E | WHA-16-161 | 202.0 | 203.0 | 1.0 | 2.97 | |||
12+00E | WHA-16-161 | 203.0 | 204.0 | 1.0 | 1.55 | |||
12+00E | WHA-16-161 | 204.0 | 205.0 | 1.0 | 1.38 | |||
12+00E | WHA-16-161 | 205.0 | 206.0 | 1.0 | 1.38 | |||
12+00E | WHA-16-161 | 206.0 | 207.0 | 1.0 | 1.59 | |||
12+00E | WHA-16-161 | 207.0 | 208.0 | 1.0 | 1.49 | |||
12+00E | WHA-16-161 | 208.0 | 209.0 | 1.0 | 2.17 | |||
12+00E | WHA-16-161 | 209.0 | 210.0 | 1.0 | 0.95 | |||
12+00E | WHA-16-161 | 210.0 | 211.0 | 1.0 | 1.36 | |||
12+00E | WHA-16-161 | 211.0 | 211.8 | 0.8 | 1.85 | |||
12+00E | WHA-16-161 | 211.8 | 212.6 | 0.8 | 1.38 | |||
12+00E | WHA-16-161 | 212.6 | 213.2 | 0.6 | 1.33 | |||
12+00E | WHA-16-161 | 248.9 | 250.0 | 1.1 | 1.05 | 1.04 | 2.9 | 2.1 |
12+00E | WHA-16-161 | 250.0 | 251.0 | 1.0 | 1.03 | |||
12+00E | WHA-16-161 | 251.0 | 251.9 | 0.8 | 1.03 | |||
09+75E | WHA-16-174 | 238.0 | 239.0 | 1.0 | 0.90 | 1.56 | 7.0 | 4.9 |
09+75E | WHA-16-174 | 239.0 | 240.0 | 1.0 | 1.25 | |||
09+75E | WHA-16-174 | 240.0 | 241.0 | 1.0 | 1.16 | |||
09+75E | WHA-16-174 | 241.0 | 242.0 | 1.0 | 1.79 | |||
09+75E | WHA-16-174 | 242.0 | 243.0 | 1.0 | 2.22 | |||
09+75E | WHA-16-174 | 243.0 | 244.0 | 1.0 | 1.64 | |||
09+75E | WHA-16-174 | 244.0 | 245.0 | 1.0 | 1.96 | |||
09+75E | WHA-16-174 | 258.8 | 259.6 | 0.7 | 0.56 | 1.26 | 9.1 | 6.4 |
09+75E | WHA-16-174 | 259.6 | 260.5 | 0.9 | 1.05 | |||
09+75E | WHA-16-174 | 260.5 | 261.5 | 1.0 | 1.59 | |||
09+75E | WHA-16-174 | 261.5 | 262.5 | 1.0 | 2.00 | |||
09+75E | WHA-16-174 | 262.5 | 263.5 | 1.0 | 0.90 | |||
09+75E | WHA-16-174 | 263.5 | 264.5 | 1.0 | 1.74 | |||
09+75E | WHA-16-174 | 264.5 | 265.5 | 1.0 | 1.64 | |||
09+75E | WHA-16-174 | 265.5 | 266.5 | 1.0 | 1.23 | |||
09+75E | WHA-16-174 | 266.5 | 267.1 | 0.6 | 0.67 | |||
09+75E | WHA-16-174 | 267.1 | 267.9 | 0.9 | 0.65 | |||
09+75E | WHA-16-174 | 282.2 | 283.0 | 0.8 | 1.05 | 1.35 | 5.8 | 4.1 |
09+75E | WHA-16-174 | 283.0 | 284.0 | 1.0 | 1.89 | |||
09+75E | WHA-16-174 | 284.0 | 285.0 | 1.0 | 1.03 | |||
09+75E | WHA-16-174 | 285.0 | 286.0 | 1.0 | 1.51 | |||
09+75E | WHA-16-174 | 286.0 | 287.0 | 1.0 | 1.64 | |||
09+75E | WHA-16-174 | 287.0 | 288.0 | 1.0 | 0.93 | |||
13+00E | WHA-16-178 | 34.8 | 35.8 | 1.0 | 1.49 | 2.00 | 6.6 | 4.7 |
13+00E | WHA-16-178 | 35.8 | 37.0 | 1.2 | 2.20 | |||
13+00E | WHA-16-178 | 37.0 | 38.0 | 1.0 | 2.48 | |||
13+00E | WHA-16-178 | 38.0 | 39.0 | 1.0 | 2.17 | |||
13+00E | WHA-16-178 | 39.0 | 40.0 | 1.0 | 2.56 | |||
13+00E | WHA-16-178 | 40.0 | 40.7 | 0.7 | 1.83 | |||
13+00E | WHA-16-178 | 40.7 | 41.4 | 0.7 | 0.86 | |||
13+00E | WHA-16-178 | 126.9 | 128.0 | 1.1 | 0.78 | 1.92 | 10.3 | 7.3 |
13+00E | WHA-16-178 | 128.0 | 129.0 | 1.0 | 1.59 | |||
13+00E | WHA-16-178 | 129.0 | 130.0 | 1.0 | 2.33 | |||
13+00E | WHA-16-178 | 130.0 | 131.0 | 1.0 | 3.16 | |||
13+00E | WHA-16-178 | 131.0 | 132.0 | 1.0 | 1.87 | |||
13+00E | WHA-16-178 | 132.0 | 133.0 | 1.0 | 1.36 | |||
13+00E | WHA-16-178 | 133.0 | 134.0 | 1.0 | 2.56 | |||
13+00E | WHA-16-178 | 134.0 | 135.0 | 1.0 | 0.84 | |||
13+00E | WHA-16-178 | 135.0 | 135.8 | 0.8 | 1.74 | |||
13+00E | WHA-16-178 | 135.8 | 136.5 | 0.8 | 3.38 | |||
13+00E | WHA-16-178 | 136.5 | 137.2 | 0.7 | 1.94 | |||
13+00E | WHA-16-178 | 151.0 | 152.0 | 1.0 | 1.59 | 1.61 | 12.2 | 8.6 |
13+00E | WHA-16-178 | 152.0 | 153.0 | 1.0 | 2.07 | |||
13+00E | WHA-16-178 | 153.0 | 154.0 | 1.0 | 0.73 | |||
13+00E | WHA-16-178 | 154.0 | 155.0 | 1.0 | 1.46 | |||
13+00E | WHA-16-178 | 155.0 | 156.0 | 1.0 | 1.74 | |||
13+00E | WHA-16-178 | 156.0 | 157.0 | 1.0 | 1.44 | |||
13+00E | WHA-16-178 | 157.0 | 158.0 | 1.0 | 1.38 | |||
13+00E | WHA-16-178 | 158.0 | 159.0 | 1.0 | 1.83 | |||
13+00E | WHA-16-178 | 159.0 | 160.0 | 1.0 | 1.98 | |||
13+00E | WHA-16-178 | 160.0 | 161.0 | 1.0 | 2.00 | |||
13+00E | WHA-16-178 | 161.0 | 162.0 | 1.0 | 1.96 | |||
13+00E | WHA-16-178 | 162.0 | 163.2 | 1.2 | 1.23 | |||
13+00E | WHA-16-178 | 230.0 | 231.0 | 1.0 | 1.21 | 1.49 | 8.1 | 5.7 |
13+00E | WHA-16-178 | 231.0 | 232.0 | 1.0 | 2.71 | |||
13+00E | WHA-16-178 | 232.0 | 233.0 | 1.0 | 1.25 | |||
13+00E | WHA-16-178 | 233.0 | 234.0 | 1.0 | 2.30 | |||
13+00E | WHA-16-178 | 234.0 | 235.0 | 1.0 | 1.42 | |||
13+00E | WHA-16-178 | 235.0 | 236.0 | 1.0 | 0.97 | |||
13+00E | WHA-16-178 | 236.0 | 237.0 | 1.0 | 1.46 | |||
13+00E | WHA-16-178 | 237.0 | 238.1 | 1.1 | 0.65 | |||
07+50E | WHA-16-182 | 187.4 | 188.0 | 0.6 | 2.56 | 1.89 | 4.6 | 3.2 |
07+50E | WHA-16-182 | 188.0 | 189.0 | 1.0 | 2.35 | |||
07+50E | WHA-16-182 | 189.0 | 190.0 | 1.0 | 2.30 | |||
07+50E | WHA-16-182 | 190.0 | 191.0 | 1.0 | 1.61 | |||
07+50E | WHA-16-182 | 191.0 | 192.0 | 1.0 | 0.90 | |||
07+50E | WHA-16-182 | 211.5 | 212.0 | 0.5 | 1.55 | 1.62 | 9.5 | 6.7 |
07+50E | WHA-16-182 | 212.0 | 213.0 | 1.0 | 1.96 | |||
07+50E | WHA-16-182 | 213.0 | 214.0 | 1.0 | 2.02 | |||
07+50E | WHA-16-182 | 214.0 | 215.0 | 1.0 | 2.93 | |||
07+50E | WHA-16-182 | 215.0 | 216.0 | 1.0 | 1.66 | |||
07+50E | WHA-16-182 | 216.0 | 217.0 | 1.0 | 0.67 | |||
07+50E | WHA-16-182 | 217.0 | 218.0 | 1.0 | 1.59 | |||
07+50E | WHA-16-182 | 218.0 | 219.0 | 1.0 | 2.48 | |||
07+50E | WHA-16-182 | 219.0 | 220.0 | 1.0 | 0.43 | |||
07+50E | WHA-16-182 | 220.0 | 221.0 | 1.0 | 0.84 | |||
07+50E | WHA-16-182 | 249.9 | 250.5 | 0.7 | 1.96 | 1.37 | 10.3 | 7.3 |
07+50E | WHA-16-182 | 250.5 | 251.5 | 1.0 | 1.92 | |||
07+50E | WHA-16-182 | 251.5 | 252.5 | 1.0 | 1.61 | |||
07+50E | WHA-16-182 | 252.5 | 253.5 | 1.0 | 1.74 | |||
07+50E | WHA-16-182 | 253.5 | 254.5 | 1.0 | 2.13 | |||
07+50E | WHA-16-182 | 254.5 | 255.5 | 1.0 | 0.84 | |||
07+50E | WHA-16-182 | 255.5 | 256.5 | 1.0 | 1.08 | |||
07+50E | WHA-16-182 | 256.5 | 257.5 | 1.0 | 0.78 | |||
07+50E | WHA-16-182 | 257.5 | 258.5 | 1.0 | 1.59 | |||
07+50E | WHA-16-182 | 258.5 | 259.5 | 1.0 | 0.60 | |||
07+50E | WHA-16-182 | 259.5 | 260.2 | 0.7 | 0.82 | |||
07+50E | WHA-16-182 | 265.2 | 266.0 | 0.8 | 1.49 | 1.62 | 9.8 | 6.9 |
07+50E | WHA-16-182 | 266.0 | 267.0 | 1.0 | 2.00 | |||
07+50E | WHA-16-182 | 267.0 | 268.0 | 1.0 | 2.35 | |||
07+50E | WHA-16-182 | 268.0 | 269.0 | 1.0 | 2.84 | |||
07+50E | WHA-16-182 | 269.0 | 270.0 | 1.0 | 1.92 | |||
07+50E | WHA-16-182 | 270.0 | 271.0 | 1.0 | 1.49 | |||
07+50E | WHA-16-182 | 271.0 | 271.7 | 0.6 | 1.42 | |||
07+50E | WHA-16-182 | 271.7 | 272.3 | 0.7 | 1.03 | |||
07+50E | WHA-16-182 | 272.3 | 273.1 | 0.8 | 0.28 | |||
07+50E | WHA-16-182 | 273.1 | 274.0 | 0.9 | 1.46 | |||
07+50E | WHA-16-182 | 274.0 | 275.0 | 1.0 | 0.90 |
* True width estimated for drill holes with a dip of 50° and a general dip of 85° to the SW for the mineralized structure |
The geological 3D model is currently being updated, while assays are pending. The next phase will be to update the mineral resources estimate and reserves evaluation, including the newly discovered Doris zone. The mineral estimation will be carried out by SGS Canada Inc., with Jean-Philippe Paiement being assign as a QP.
The 2016 drilling campaign was planned and supervised by Jean-Philippe Paiement, M.Sc. P. Geo, at SGS Canada Inc. Samples are prepared by the SGS Canada Inc. laboratory in Quebec City and are analyzed by the SGS Canada Inc. accredited laboratory in Lakefield.
A QAQC program involving blank samples (3% of the sampling stream), standard samples (3% of the sampling stream) and field duplicates (3% of the sampling stream) has been established during sampling. 10% of the mineralized samples will also be sent to ALS for pulp duplicates once the campaign is over. The work is carried out in accordance with CIM's mining exploration guidelines.
The technical parts of this press release were prepared by Jean-Philippe Paiement, M.Sc. P. Geo, at SGS Canada Inc., qualified person under Regulation NI 43-101.
About Nemaska Lithium
Nemaska Lithium intends to become a lithium hydroxide and lithium carbonate supplier to the emerging lithium battery market that is largely driven by electric vehicles, cell phones, tablets and other consumer products. The Corporation is developing in Quebec one of the most important spodumene lithium hard rock deposit in the world, both in volume and grade. The spodumene concentrate produced at Nemaska Lithium's Whabouchi mine will be shipped to the Corporation's lithium compounds processing plant to be built in Shawinigan, Quebec. This plant will transform spodumene concentrate into high purity lithium hydroxide and carbonate using the proprietary methods developed by the Corporation, and for which patent applications have been filed.
This document may contain forward-looking statements that reflect management's current expectations regarding future events. Forward-looking statements are based on a number of factors and include risks and uncertainties. Actual results may differ from forecast results. Management assumes no obligation beyond what is required under the law to update or revise forward-looking statements pursuant to new information or future events.
Further information regarding Nemaska Lithium is available in the SEDAR database (www.sedar.com) and on the Corporation's website at: www.nemaskalithium.com.
Contact
Mr. Victor Cantore
Investor Relations
514 831-3809
victor.cantore@nemaskalithium.com
Mrs. Wanda Cutler
Investor Relations
416 303-6460
wanda.cutler@nemaskalithium.com
www.nemaskalithium.com