Suche
 
Folgen Sie uns auf:

Asiamet’s Positive Feasibility Drilling Highlights Key Attributes of BKM Project

15.11.2016  |  FSCwire

White Rock, British Columbia (FSCwire) - Asiamet Resources Ltd. ("ARS" or the “Company”) is pleased to provide an update on Resource evaluation drilling being undertaken as part of feasibility studies on the Beruang Kanan Main (“BKM”) copper deposit in Central Kalimantan, Indonesia.

A total 56 holes for 5600 meters of diamond core drilling have been completed and assay results from a further ten holes drilled in the northern area of the deposit are reported below. An additional 62 holes/5400 meters are planned.

Feasibility study Resource drilling completed to date has emphasized a number of key attributes with potential to enhance BKM project economics.

Highlights

  • Excellent continuity of copper mineralization has been established across a significant proportion of the deposit with high rates of conversion from Inferred Resource to higher confidence Measured and Indicated Resources anticipated when the new Resource estimate is completed.
  • Expectation that a considerable part of the Resource will be available for economic evaluation to determine Mineral Reserves. Only Measured and Indicated Resources can be considered in the economic evaluation and subsequent calculation of Mineral Reserves, hence valuations placed on these higher confidence level Resources are generally considerably greater than those for Inferred Resources. This represents a major de-risking and value enhancing step for the BKM project.
  • Coherent higher grades established within the BKM044 and 058 zones provide an excellent opportunity to selectively mine and enhance production early in the project life.
  • Extensive areas of very shallow mineralization with potential to further reduce the already low stripping ratio outlined in the BKM Preliminary Economic Assessment (“PEA”) (refer ARS news release April 5, 2016) have been delineated. A lower strip ratio has the potential to further reduce the operating costs projected in the PEA.

Better results from the most recent drilling include:

BKM32200-04     29.5 meters at 0.85% Cu (from 97.5 meters)

  • Including 11.0 meters at 1.25% Cu (from 113.5 meters)

BKM32200-05     17.0 meters at 1.57% Cu (from 1.0 meters)

  • Including 7.0 meters at 2.54% Cu (from 2.0 meters)
  • Including 3.0 meters at 1.87% Cu (from 11.0 meters)

BKM32300-02     4.0 meters at 2.02% Cu (from 6.6 meters)

     19.0 meters at 1.16% Cu (from 28.6 meters)

  • Including 9.0 meters at 2.17% Cu (from 38.6 meters)

BKM32300-03     10.0 meters at 0.54% Cu (from 0.0 meters)

      2.0 meters at 1.48% Cu (from 32.0 meters)

BKM32320-01     42.0 meters at 0.56% Cu (from 33.0 meters)

  • Including 7.0 meters at 1.43% Cu (from 41.0 meters)

As part of the feasibility study Resource quality control and metallurgical test work programs, a series of holes are being drilled on different orientations/angles and as twin or scissor holes in order to verify the robustness of the BKM Resource and provide mineralized material for detailed metallurgical test work.

BKM32200-04 (127.0m End of hole ‘EOH’) was drilled in the southern area of BK044 Zone to confirm the orientation of mineralization intersected in previous holes BKM32150-03 and BK048-01 (refer ARS Press Releases September 29, 2015 and June 10, 2013), and for metallurgical sampling.  The upper section of this drill hole was sent for metallurgical test work (interval 14.5m - 97.5m, or 83 meters) and assays for this interval will be reported at a later date.  Infill dill hole BKM32200-05 was drilled 50m west of BKM32200-04 and intersected higher grade copper mineralization from surface.

Resource infill hole BKM32300-02 (100.0m EOH) was drilled at the eastern margin of the BK044 Zone and confirmed continuous, shallow, higher grade copper mineralization hosted in quartz stockwork and pyrite veins.  A mineralized section of this drill hole was sent for metallurgical test work (interval 10.6m - 28.6m or 18 meters), with assays above and below this interval confirming high grade copper mineralization.  Hole BKM32300-03 (85.4m EOH) was drilled 50 meters east of BKM32300-02 and outside of BK044 Zone, intersecting low to moderate grade copper mineralization. 

BKM32320-01 (137.0m EOH), drilled to confirm the orientation of mineralization intersected in previous holes on section line BKM32300, successfully confirmed near surface moderate grade copper mineralization. 

The primary purposes of drill holes BKM32400-01 (189.8m EOH) and BKM32400-02 (111.5m EOH) were to provide sample for metallurgical test work.

Drill hole BKM32500-04 (41.5m EOH) did not intersect significant copper mineralization and closes off the mineralization to the west as expected.

Drill holes BKM32600-01 (102.1m EOH) and BKM32600-02 (66.5m EOH) were drilled 100 and 150 meters west of and outside the current BKM Resource envelope respectively. BKM32600-01 confirmed copper mineralization extends more than 100 meters west of the current BKM resource envelope with a broad zone of low grade mineralization intersected. BKM32600-02 intersected only spotty copper mineralization.

A drill hole location plan and a table of full assay results are provided in Figure 1 and Table 1 respectively.

Tony Manini, Asiamet’s Chief Executive Officer commented:

“Ongoing Resource evaluation drilling at BKM continues to display excellent continuity of copper grade and thickness within the existing Resource and also extensions in some areas. Based on the work completed thus far, a high rate of conversion from Inferred to Measured and Indicated Resources is anticipated when the drilling and a new Resource estimate is completed.  This is an extremely pleasing and important outcome as the drill out and upgrade of Inferred to Measured and Indicated Resources is a major de-risking and value enhancing step for all projects.

Asiamet’s focused strategy for the development of the Company and its projects is very much on track. Results from the BKM feasibility study have met or exceeded expectations to date and corporate activities relating to the Beutong and Jelai licence conversions, and project funding and development, have been considerably progressed. We look forward to updating shareholders as these various initiatives are further advanced.”  

Qualified Person

Data disclosed in this press release have been reviewed and verified by ARS’s qualified person, Stephen Hughes, P. Geo, Vice President Exploration of the Company and a Qualified Person within the meaning of NI 43-101 and for the purposes of the AIM Rules.

ON BEHALF OF THE BOARD OF DIRECTORS

Tony Manini, Deputy Chairman and CEO

For further information, please contact:

-Ends-

Tony Manini
Deputy Chairman and CEO, Asiamet Resources Ltd.
Telephone: +61 3 8644 1300
Email: tony.manini@asiametresources.com

FlowComms Limited

Sasha Sethi

Telephone: +44 (0) 7891 677 441

Email: Sasha@flowcomms.com
 

Asiamet Resources Nominated Adviser
RFC Ambrian Limited

Andrew Thomson / Oliver Morse

Telephone: +61 8 9480 2500

Email: Andrew.Thomson@rfcambrian.com / Oliver.Morse@rfcambrian.com

VSA Capital Limited
Andrew Raca / Justin McKeegan

Telephone: +44 20 3005 5004 / +44 20 3005 5009

Email: araca@vsacapital.com

Optiva Securities Limited
Christian Dennis

Telephone: +44 20 3137 1903

Email: Christian.Dennis@optivasecurities.com

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains forward-looking statements that are based on the Company’s current expectations and estimates. Forward-looking statements are frequently characterized by words such as “plan”, “expect”, “project”, “intend”, “believe”, “anticipate”, “estimate”, “suggest”, “indicate” and other similar words or statements that certain events or conditions “may” or “will” occur. Such forward-looking statements involve known and unknown risks, uncertainties and other factors that could cause actual events or results to differ materially from estimated or anticipated events or results implied or expressed in such forward-looking statements.   Such factors include, among others: the actual results of current exploration activities; conclusions of economic evaluations; changes in project parameters as plans continue to be refined; possible variations in ore grade or recovery rates; accidents, labour disputes and other risks of the mining industry; delays in obtaining governmental approvals or financing; and fluctuations in metal prices.  There may be other factors that cause actions, events or results not to be as anticipated, estimated or intended.  Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.

Table 1: Recent drill intercepts.

HOLE ID

From

To

Length

Copper (%)

Cumulative Cu Mineralized Interval

BKM32200-04

11.6

14.5

2.9

0.36

32.4 Meters

BKM32200-04

14.5

97.5

Metallurgical Test Work

BKM32200-04

97.5

127.0

29.5

0.85

Including

113.5

124.5

11.0

1.25

BKM32200-05

1.00

18.00

17.00

1.57

32.0 Meters

Including

2.00

9.00

7.00

2.54

Including

11.00

14.00

3.00

1.87

BKM32200-05

23.00

32.00

9.00

0.37

BKM32200-05

50.00

56.00

6.00

0.55

Including

54.00

56.00

2.00

1.56

BKM32300-02

6.6

10.6

4.0

2.02

23.0 Meters

BKM32300-02

10.6

28.6

Metallurgical Test Work

BKM32300-02

28.6

47.6

19.0

1.16

Including

38.6

47.6

9.0

2.17

BKM32300-03

0.0

10.0

10.0

0.54

31.9 Meters

BKM32300-03

13.0

24.0

11.0

0.34

BKM32300-03

32.0

34.0

2.0

1.48

BKM32320-01

23

28

5

0.28

76.0 Meters

BKM32320-01

33

75

42

0.56

Including

41

48

7

1.43

BKM32320-01

108

137

29

0.43

BKM32400-01

4.0

19.0

15.0

0.56

53.0 Meters

BKM32400-01

34.0

84.0

Metallurgical Test Work

BKM32400-01

129.0

167.0

38.0

0.33

BKM32400-02

Metallurgical Test Work

NA

BKM32500-04

No Significant Assays

NA

BKM32600-01

25.0

59.0

34.0

0.23

34.0 Meters

Including

25.0

34.0

9.0

0.34

BKM32600-02

No Significant Assays

NA

Notes: Grade intercepts are calculated as a weighted average grade ≥0.2% copper (uncut). 

True widths are interpreted to be between 80-100% of the reported lengths, unless otherwise stated.

To view the graphic in its original size, please click here

Figure 1: Location map showing section lines and drill collars



To view this press release as a PDF file, click onto the following link:
public://news_release_pdf/aisiamet11152016b.pdf

Source: Asiamet Resources Ltd. (TSX Venture:ARS, AIM:ARS)

To follow Asiamet Resources Ltd. on your favorite social media platform or financial websites, please click on the icons below.


Maximum News Dissemination by FSCwire. http://www.fscwire.com

Copyright © 2016 Filing Services Canada Inc.






Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
Asiamet Resources Ltd.
Bergbau
A14XBY
BM04521V1038
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"