Suche
 
Folgen Sie uns auf:

Cascabel Exploration Update – Alpala Mineral Resource update expected in December 2018

05.10.2018  |  GlobeNewswire

OTTAWA, Oct. 05, 2018 - Cornerstone Capital Resources Inc. (“Cornerstone” or “the Company”) (TSXV:CGP) (Frankfurt:GWN) (Berlin:GWN) (OTC:CTNXF) is pleased to announce the following update on the exploration program at its Cascabel copper-gold porphyry joint venture exploration project in northern Ecuador, in which the Company has a 15% interest financed through to completion of a feasibility study, plus 10% of the shares of joint venture partner and project operator SolGold plc, for a total direct and indirect interest in Cascabel of approximately 23%.

Figures referred to in this news release can be seen in PDF format by accessing the version of this release on the Company’s website (www.cornerstoneresources.com) or by clicking on the link below:

http://www.cornerstoneresources.com/i/pdf/NR18-28Figures.pdf.

HIGHLIGHTS:

  • With over 124,000m of drill hole assays now received, a further 70,400m of drilling has been added to the existing Alpala Maiden Resource (MRE)1 during 2018 of 2.3 million tonnes (Mt) copper (Cu) and 6.0 million ounces (Moz) gold (Au) in the indicated category and 2.9 Mt Cu and 6.3 Moz Au in the inferred category.
  • Approximately 32,000m of further drilling is scheduled to be completed at Alpala in 2018, further adding to the MRE update.
  • Updated MRE projected for completion and release in December 2018.

  • Recent drilling highlights include:
    • Hole 55R-D1: 870m @ 0.72% copper equivalent (“CuEq”2) (true width3 348m @ 0.50% Cu, 0.36 g/t Au) from 706m depth, including:
      • 378m @ 1.17% CuEq (true width 151m);
    • Hole 58-D1: 984m @ 1.08% CuEq (true width 394m @ 0.73% Cu, 0.56 g/t Au) from 684m depth, including:
      • 456m @ 1.71% CuEq (true width 182m); and
    • Hole 66: 634m @ 1.25% CuEq (true width 254m @ 0.74% Cu, 0.81 g/t Au) from 870m depth, including:
      • 301m @ 1.88% CuEq (true width 121m), and
      • 174m @ 2.46% CuEq (true width 70m), open at depth.
  • Hole 66 intersects rich porphyry style mineralized zone containing visible gold.
  • Hole 64 intersects a new zone at Alpala NW containing primary bornite4 mineralization.
  • Assay turnaround reduced to 3 weeks.
  • Internal geology, grade and resource modelling indicates potential for significant growth in total metal inventory at Alpala at all cut-off grades.

Commenting on today’s release, Cornerstone Vice President, Exploration, Yvan Crepeau, said: “Since the release of the MRE in January 2018, drilling has been very successful, intersecting high grade copper-gold mineralization, expanding the size and increasing the overall grade of the high grade core zone. Furthermore, the recent intercept of bornite-chalcopyrite mineralization in hole 64 may be an indication of another porphyry center and/or that mineralized zones could be connected at depth as suggested by the 3D magnetic model”.

FURTHER INFORMATION:

Cascabel is located in northwestern Ecuador in an under-explored northern section of the Andean Copper Belt, 60 km northeast of the undeveloped inferred resource of 982 million tons at 0.89% Cu Llurimaga (formerly Junin) copper project5 (Figure 1).

An updated MRE is expected to provide a significantly greater resource base for the project upon completion of approximately 32,000m of further planned drilling to December 31, 2018. JV Partner and project operator SolGold plc will assay 100% of metres drilled (148,000m) at the project, with 24,000m of drilling currently awaiting assay results. The assay backlog is set to clear before December 2018.

Highlights of assay results expected to add to the existing MRE at Alpala are detailed in the Table below:

Hole ID DepthFrom
m
DepthTo
m
Interval
m
True width
m
Cu
%
Au
g/t
CuEq
%
Cut-off
(CuEq%)
CSD-17-037 1380 2222 842 336.8 0.35 0.15 0.44 0.20
CSD-18-036-D1 1574 2226.7 652.7 261.1 0.34 0.11 0.41 0.20
CSD-18-041-D1 914 1827.7 913.7 365.5 0.47 0.40 0.72 0.10
CSD-18-041-D1 1282 1668 386 154.4 0.70 0.79 1.19 0.50
CSD-18-041-D1 1346 1598 252 100.8 0.86 1.07 1.53 1.00
CSD-18-041-D1-D2 926 1779 853 341.2 0.52 0.62 0.91 0.20
CSD-18-041-D1-D2 1172 1512 340 136.0 0.78 1.21 1.54 na
CSD-18-041-D1-D2 1310 1456 146 58.4 1.04 2.03 2.32 1.00
CSD-18-042 448 1176 728 291.2 0.75 0.50 1.06 0.30
CSD-18-042 620 1124 504 201.6 0.92 0.58 1.28 0.40
CSD-18-042-D2 312 1110 798 319.2 0.32 0.24 0.47 0.10
CSD-18-042-D2 312 614 302 120.8 0.45 0.50 0.76 0.20
CSD-18-043 600 1574 974 389.6 0.48 0.37 0.71 0.10
CSD-18-043 932 1410 478 191.2 0.64 0.61 1.02 0.50
CSD-18-049 850 1700 850 340.0 0.49 0.28 0.66 0.10
CSD-18-049 872 1316 444 177.6 0.60 0.38 0.83 0.30
CSD-18-051 440 1486 1046 418.4 0.35 0.21 0.48 0.10
CSD-18-051 826 1302 476 190.4 0.53 0.36 0.75 0.30
CSD-18-055R 542 1604 1062 424.8 0.69 0.52 1.02 0.20
CSD-18-055R 1042 1590 548 219.2 0.86 0.80 1.36 0.30
CSD-18-055R 1306 1526 220 88.0 1.22 1.34 2.07 0.60
CSD-18-055R-D1 706 1575.6 869.6 347.8 0.50 0.36 0.72 0.10
CSD-18-055R-D1 1060 1438 378 151.2 0.75 0.67 1.17 0.40
CSD-18-055R-D1 1140 1252 112 44.8 1.07 1.05 1.73 0.80
CSD-18-057 500 1478 978 391.2 0.64 0.95 1.24 0.20
CSD-18-057 814 1376 562 224.8 0.85 1.37 1.72 0.40
CSD-18-057 892 1196 304 121.6 1.15 2.18 2.52 1.00
CSD-18-058 636 1702 1066 426.4 0.43 0.23 0.58 0.20
CSD-18-058 1040 1288 248 99.2 0.72 0.51 1.04 0.70
CSD-18-058-D1 684.15 1668 983.85 393.5 0.73 0.56 1.08 0.10
CSD-18-058-D1 1178 1634 456 182.4 1.10 0.96 1.71 0.50
CSD-18-058-D1 1178 1516 338 135.2 1.17 1.08 1.85 0.80
CSD-18-060 796 1122 326 130.4 0.84 0.37 1.08 0.10
CSD-18-060 802 996 194 77.6 1.28 0.54 1.61 0.30
CSD-18-061 830 1328 498 199.2 0.33 0.15 0.43 na
CSD-18-062 1056 1554 498 199.2 0.46 0.41 0.72 0.20
CSD-18-062 1136 1410 274 109.6 0.58 0.62 0.97 0.50
CSD-18-063 640 1314 674 269.6 0.36 0.16 0.46 0.20
CSD-18-066 870 1503.8 633.8 253.5 0.74 0.81 1.25 0.20
CSD-18-066 1202 1503.8 301.8 120.7 1.06 1.30 1.88 0.70
CSD-18-066 1330 1503.8 173.8 69.5 1.36 1.73 2.46 1.00
Data Aggregation Method: Intercepts reported using copper equivalent cutoff grades with up to 10m internal dilution, excluding bridging to a single sample. Minimum intersection length 50m. Gold Conversion Factor of 0.63 calculated from a copper price of US$3.00/lb and a gold price US$1300/oz. True widths of downhole interval lengths are estimated to be approximately 25% to 70%.

SolGold is encouraged by the outstanding infill drilling results, which are expected to expand and enrich the existing high-grade resource, and about notable drill hole results outside the previous resource area, such as Hole 64, which last week intersected primary bornite mineralization deep at Alpala NW. The discovery of primary bornite-chalcopyrite assemblages with magnetite and in the absence of pyrite, is indicative of the high temperature core many porphyry systems, and warrants follow up drill testing and may lead to unearthing further evidence of a second system adjacent to the Alpala Deposit (Figure 2).

Hole 66 extended the high grade core of the deposit towards the southeast at depth and intersected a zone of visible gold associated with porphyry style chalcopyrite and bornite mineralization. Very high gold grades in the core and periphery of the deposit at Alpala can be associated with related to intermediate- to high- sulfidation state sulfide-mineral assemblage associated with a phyllic alteration over-print, and is a feature common in many of the world’s richest porphyry deposits, like Oyu Tolgoi, Grasberg and Wafi-Golpu (Figure 3).

Drill hole location plans showing resource shells from the existing December 2017 Mineral Resources Estimate against current in-house models highlight resource growth predicted at cut-off grades of 0.15%CuEq and >1.5%CuEq (Figures 4 and 5).

Section (A-A’), looking northeast, through the high-grade core of the deposit (Figure 6), shows an example of infill drilling resulting in a potentially more robust, richer high-grade core of the Alpala Deposit, as exemplified by:

  • Hole 57 high grade intercept: 304m @ 2.52% CuEq (1.15% Cu, 2.18g/t Au) (from 892m depth);
  • Hole 41-D1-D2 high grade intercept: 340m @ 1.54% CuEq (0.78% Cu, 1.21g/t Au) (from 1172m depth);
  • Hole 41-D1 high grade intercept: 252m @ 1.53% CuEq (0.86% Cu, 1.07g/t Au) (from 1346m depth).

A total of 12 drill rigs are currently in operation on the project, with the entire fleet moved back to Alpala in order to expedite drilling ahead of planned December Mineral Resource Estimate. Secondary targets at Cascabel, including Aguinaga, Trivinio, and Moran are planned for drill testing as the Alpala resource development program allows.

The Company is currently changing out 2 track mounted drill rigs for man-portable drill rigs, with the first replacement man-portable now mobilized to site. The Company is increasing its man-portable portion of the Cascabel drill fleet to increase flexibility in rig movements and siting, as well achieving a higher metre rate at lower cost.

During September 2018, BHP Billiton purchased a 6% stake in SolGold. Commenting at the time of the acquisition, BHP Billiton’s CEO noted that this investment would give BHP exposure to a high quality copper exploration project in Ecuador, which is a highly prospective location for BHP, and that, consistent with their positive long-term outlook, copper is a key exploration focus for BHP as they seek to replenish their resource base.

About the Cascabel Joint Venture with SolGold:

Exploraciones Novomining S.A. (“ENSA”), an Ecuadorean company owned by SolGold plc and Cornerstone, holds 100% of the Cascabel concession. Subject to the satisfaction of certain conditions, including SolGold’s fully funding the project through to feasibility, SolGold plc will own 85% of the equity of ENSA and Cornerstone will own the remaining 15% of ENSA. SolGold is funding 100% of the exploration at Cascabel and is the operator of the project. SolGold shall receive 90% of Cornerstone’s distribution of earnings or dividends from ENSA to which Cornerstone would otherwise be entitled until such time as the amounts so received equal the aggregate amount of expenditures incurred by SolGold that would have otherwise been payable by Cornerstone, plus interest thereon from the dates such expenditures were incurred at a rate per annum equal to LIBOR plus 2 per cent until such time as SolGold is fully reimbursed.

Logging, sampling, assaying and reporting

Holes referred to in this release were or are being drilled using HTW, NTW, NQ and BQ core sizes (respectively 7.1, 5.6, 4.8 and 3.7 cm diameter). Geotechnical measurements such as core recovery, fracturing, rock quality designations (RQD’s), specific gravity and photographic logging are performed systematically prior to assaying. The core is logged, magnetic susceptibility measured and key alteration minerals identified by experienced loggers and sometimes using an on-site portable spectrometer. Core is then sawed in half at the ENSA core logging facility, and half of the core is delivered by ENSA employees for preparation at ALS Minerals Laboratories (ALS) sample preparation facility in Quito. Core samples are prepared crushing to 70% passing 2 mm (10 mesh), splitting 250 g and pulverizing to 85% passing 75 microns (200 mesh) (ALS code CRU-31, SPL21 and PUL-32). Prepared samples are then shipped to ALS in Lima, Peru where samples are assayed for a multi-element suite (ALS code ME-MSP61, 1g split, 4-acid digestion, ICP-MS finish). Over limit results for Ag (> 100 g/t) and Cu, (> 1%) are systematically re-assayed (ALS code Ag-AA62, 4-acid digestion, AAS finish). Gold is assayed using a 30 g split, Fire Assay (FA) and AA finish (ALS code Au-AA23).

Quality assurance / Quality control (QA/QC)

The ALS Laboratory is a qualified assayer that performs and makes available internal assaying controls. Duplicates, certified blanks and standards are systematically used (1 control sample every 15-20 samples). Rejects, a 100 g pulp for each core sample and the remaining half-core are stored for future use and controls.

Qualified Person:

Yvan Crepeau, MBA, P.Geo., Cornerstone’s Vice President, Exploration and a qualified person in accordance with National Instrument 43-101, is responsible for supervising the exploration program at the Cascabel project for Cornerstone and has reviewed and approved the information contained in this news release.

About Cornerstone:

Cornerstone Capital Resources Inc. is a mineral exploration company with a diversified portfolio of projects in Ecuador and Chile, including in the Cascabel gold-enriched copper porphyry joint venture in north west Ecuador.

Further information is available on Cornerstone’s website: www.cornerstoneresources.com and on Twitter. For investor, corporate or media inquiries, please contact:

Investor Relations:
Mario Drolet (Montreal); Email: Mario@mi3.ca;
Tel. (514) 346-3813

Corporate Matters: Sabino Di Paola, CFO (Ottawa); Email: sdipaola@cornerstoneresources.ca;
Tel. (343) 689-0714

Due to anti-spam laws, many shareholders and others who were previously signed up to receive email updates and who are no longer receiving them may need to re-subscribe at http://www.cornerstoneresources.com/s/InformationRequest.asp

Cautionary Notice:
This news release may contain ‘Forward-Looking Statements’ that involve risks and uncertainties, such as statements of Cornerstone’s plans, objectives, strategies, intentions and expectations. The words “potential,” “anticipate,” “forecast,” “believe,” “estimate,” “expect,” “may,” “project,” “plan,” and similar expressions are intended to be among the statements that identify ‘Forward-Looking Statements.’ Although Cornerstone believes that its expectations reflected in these ‘Forward-Looking Statements’ are reasonable, such statements may involve unknown risks, uncertainties and other factors disclosed in our regulatory filings, viewed on the SEDAR website at www.sedar.com. For us, uncertainties arise from the behaviour of financial and metals markets, predicting natural geological phenomena and from numerous other matters of national, regional, and global scale, including those of an environmental, climatic, natural, political, economic, business, competitive, or regulatory nature. These uncertainties may cause our actual future results to be materially different than those expressed in our Forward-Looking Statements. Although Cornerstone believes the facts and information contained in this news release to be as correct and current as possible, Cornerstone does not warrant or make any representation as to the accuracy, validity or completeness of any facts or information contained herein and these statements should not be relied upon as representing its views after the date of this news release. While Cornerstone anticipates that subsequent events may cause its views to change, it expressly disclaims any obligation to update the Forward-Looking Statements contained herein except where outcomes have varied materially from the original statements.

On Behalf of the Board,
Brooke Macdonald
President and CEO

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

1 A maiden Mineral Resource Estimate (MRE) for the Alpala deposit, estimated from the initial 53,616m of drilling, was announced on January 3, 2018 (see Cornerstone news release 18-01 on that date) and the corresponding Technical Report prepared by SRK Exploration Services Ltd. and qualified persons James Gilbertson, Martin Pittuck, and John Willis in compliance with National Instrument 43-101 was filed at www.sedar.com on February 16, 2018 (http://www.cornerstoneresources.com/i/pdf/AlpalaMRE_0218.pdf). The MRE announced resources of: 430Mt @ 0.8% CuEq Indicated and 650Mt @ 0.6% CuEq Inferred (3.4 Mt CuEq Indicated 4.0 Mt CuEq Inferred) at 0.3% CuEq cut off, for a metal inventory of 2.3 Mt Cu and 6.0 Moz Au Indicated and 2.9 Mt Cu and 6.3 Moz Au Inferred, including a high-grade core of 70Mt @ 1.8% CuEq Indicated (1.2Mt CuEq) and 50Mt @ 1.8% CuEq Inferred (0.8 Mt CuEq) at a 1.1% CuEq cut off. A further 50 Mt @ 1.0% CuEq Indicated (1.0 Mt CuEq) and 50 Mt @ 1.0% CuEq Inferred (1.0 Mt CuEq) is added to the high grade core if a 0.9% CuEq cut off is used, giving a high grade core of 220 Mt at a weighted average grade of 1.44% CuEq.

2 All references in this news release to copper equivalent (CuEq) grades are composed of copper and gold values, calculated using a gold conversion factor of 0.63, determined using an updated copper price of USD3.00/pound and an updated gold price of USD1300/ounce.

3 True widths of down hole interval lengths are estimated by JV partner and project operator SolGold plc to be approximately 25-70%.

4 Bornite is a mineral containing about 63% Cu.

5 0.4% Cu cut-off grade; Micon International Co. Ltd. Technical Report for Ascendant Exploration SA, August 20, 2004, pages 28 & 29. Mineralization identified at the Llurimaga copper project is not necessarily indicative of the mineralization on the Cascabel Property.


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
Cornerstone Capital Resources Inc.
Bergbau
-
-
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"