Jaxon Reports Porphyry Intrusion Dating Study Results from Red Springs and Announces Stock Option Grant

Vancouver, January 6, 2020 - Jaxon Mining Inc. (TSXV: JAX) (FSE: 0U31) (OTC: JXMNF) ("Jaxon" or the "Company") is pleased to announce the results from the first in a series of porphyry intrusion "rock" dating studies from the Red Springs Project. The study reveals the Cu deposit at Red Springs was formed in the Late Cretaceous period, placing it within a comparable age range of other previously discovered porphyry deposits located in the Stikinia area along the Skeena Arch (Figure 1).

During 2019's phase 2 field work at Red Springs, rock samples were recovered from three K-feldspar porphyritic intrusion outcrops (Figure 2). Assay and petrographic results for these samples were released November 12, 2019 (https://www.jaxonmining.com/news/2019/jaxon-reports-preliminary-ground-magnetic-survey-results-from-red-springs-and-assay-results-for-k-feldspar-porphyry-outcrop) and December 17, 2019 (https://www.jaxonmining.com/news/2019/jaxon-reports-petrographic-study-results-from-red-springs-and-confirms-discovery-of-disseminated-chalcopyrite-bearing).

Figure 1: Two main episodes of BC porphyry formation and porphyry Cu deposit forming age at Red Springs (Modified from BC Ministry of Energy and Mines, 2011)

To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/881/51156_cac0f8e2c4e8b925_001full.jpg

Figure 2: Comprehensive map of magnetic/IP and Cu in soil anomalies and porphyritic rock outcrop sample locations and mineralization at the Red Springs Project

To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/881/51156_cac0f8e2c4e8b925_002full.jpg

Three porphyry intrusion rocks samples were collected from Outcrop B and SP285 areas in Figure 2.

Table 1: Intrusion Rock Samples Information Summary

U-Pb geochronology of zircon for all three samples were conducted by LA-ICP-MS at Nanjing FocuMS Technology Co. Ltd. December 2019. Australian Scientific Instruments RESOlution S-155 laser-ablation system (Canberra, Australian) and Agilent Technologies 7700x quadrupole ICP-MS (Hachioji, Tokyo, Japan) were combined for experiments LA-ICP-MS. Test dating results are shown in Table 1 and Figures 3-5 below.

Figure 3: Testing Date for Sample SP285

To view an enhanced version of Figure 3, please visit:
https://orders.newsfilecorp.com/files/881/51156_cac0f8e2c4e8b925_003full.jpg

Figure 4: Testing Date for Sample A0027087 (Outcrop B)

To view an enhanced version of Figure 4, please visit:
https://orders.newsfilecorp.com/files/881/51156_cac0f8e2c4e8b925_004full.jpg

Figure 5: Testing Date for Sample PR-POR (Outcrop B)

To view an enhanced version of Figure 5, please visit:
https://orders.newsfilecorp.com/files/881/51156_cac0f8e2c4e8b925_005full.jpg

Highlights of Dating Study of Three K-feldspar Porphyry Outcrop Samples at the Red Springs Project

• Testing zircon ages for three samples A0027087，PR-POR and SP285 are 66.20±0.35, 66.51±0.31 and 67.56±0.39 respectively. All fall in the first major episode of BC porphyry formation from Late Cretaceous to Early Eocene age period.
• The ages for the first two samples from the same outcrop area with the same rock types are within the same age range. The age of sample SP285 is approximately one million years older with more magnetite and other dark minerals and a strong magnetic anomaly.
• Three samples may be from different evolution phasing magma which are from the same source magma chamber or SP285 may be early phase intrusion.
• Date testing results are consistent with previous outcrop observations and petrographic studies which states samples A0027087 and PR-POR rocks may be the late phase of porphyry intrusion dykes. SP285 sample represents the early phase hosting intrusion rocks (Figure 6).

Figure 6: Proposed preliminary 3D mineralization model of the Red Springs Porphyry Project. A, B and C, outcrops of K-feldspar granodiorite porphyry intrusion with disseminated chalcopyrite; S285, PR-POR and A0027085 dating samples

To view an enhanced version of Figure 6, please visit:
https://orders.newsfilecorp.com/files/881/51156_cac0f8e2c4e8b925_006full.jpg

Mr. John King Burns, CEO and Chairman of the Board commented, "These first rock dating results tie our rocks into a time window in regional geological history which resulted in the formation of a number of documented porphyries in the Skeena Arch area. This dating work creates an additional data set that will extend our understanding of the system we have discovered and will augment our continuing structural mapping work."

"Jaxon Mining is a Corporate Member of MDRU-Mineral Deposit Research Unit at the University of British Columbia (UBC). Following the establishment of a research agreement, the MDRU porphyry team will provide research expertise, laboratory and technical support to Jaxon's various data sets and geotechnical methods. MDRU research will support our geologists in their decision-making as we further develop our conceptual 3D model of the system at Red Springs. That model will be used to vector in on and develop designs for our drilling targets to be proposed for the 2020 summer and fall work seasons. Access to MDRU's scientists, their existing data sets and experience with porphyry systems in British Columbia and other parts of the world are remarkable assets that will contribute to our geologically informed targeting process."

Stock Option Grant

The Company has granted incentive stock options to certain of its directors, officers, employees and consultants to purchase up to 4,400,000 common shares of the Company at an exercise price of $0.07 per share for a period of five years from the date of grant.

Sample Preparation and Analyses

All samples described in the news release were collected by the Company's Qualified Professional Geologists. The thin sections of all the samples were prepared by Vancouver GeoTech Labs of Unit #155 - 11951 Mitchell Road Richmond, BC, Canada.

U-Pb geochronology of zircon was conducted by LA-ICP-MS at Nanjing FocuMS Technology Co. Ltd. Australian Scientific Instruments RESOlution S-155 laser-ablation system (Canberra, Australia) and Agilent Technologies 7700x quadrupole ICP-MS (Hachioji, Tokyo, Japan) were combined for the experiments. The 193 nm ArF excimer laser, homogenized by a set of beam delivery systems, was focused on zircon surface with fluence of 3.5J/cm2. Each acquisition incorporated 20 s background (gas blank), followed by spot diameter of 33 um at 5 Hz repetition rate for 40 s. Helium was applied as carrier gas to efficiently transport aerosol out of the ablation cell, and was mixed with argon via T-connector before entering ICP torch. Dwell times were set to 20 ms for 207Pb, 15 ms for 206Pb and 208Pb, 10 ms for 232Th and 238U, and 8 ms for other trace elements. Harvard standard zircon 91500 (1062Ma) was used as external standard to correct instrumental mass discrimination and elemental fractionation during the ablation. GJ-1(600Ma) and Plešovice (337Ma) were treated as quality control for geochronology. Trace elements abundance of zircon were external calibrated against NIST SRM 610 with Si as internal standard. Raw data reduction was performed off-line by ICPMSDataCal software (Liu et al, 2010).

Chip and prospecting samples were collected in the field by experienced, professional prospectors and geological staff who selected hand samples from outcrop, chip samples, boulder and talus debris samples suitable for slabbing by rock saw. The samples were numbered, described and located in the field for follow-up. Numbered rock sample tags were placed inside each bag, securely closed for transport to the Company's secure cold storage locked facility in Smithers, B.C. Representative sample slabs were cut from large specimens and halved rock samples so that portions of select samples could be saved for the Company's rock library, descriptive purposes and petrographic study. MS Analytical of Langley, B.C. received the Rice Bag shipments after secure transport from Smithers. Samples were prepared by crushing, grinding and pulverizing to a pulp with barren material washing between each sample at the crush and pulverizing stages. Then 20 g of pulp was used for the (IMS-117 code) ultra-trace level ICP/MS AR digestion method, and four acid 0.2 g ore grade ICP - AES method (ICP-240) and for the overlimit gold the FAS-415 method of 30 g fusion Gravimetric method was used to report gold ASSAYS. Overlimit silver is determined by Fire ASSAY 415 method. Laboratory standards and QA - QC is monitored by the Company.

Qualified Person

Yingting (Tony) Guo, P.Geo., President and Chief Geologist for Jaxon Mining Inc., a Qualified Person as defined by National Instrument 43-101, has reviewed and prepared the scientific and technical information and verified the data supporting such scientific and technical information contained in this news release.

About MDRU

https://www.mdru.ubc.ca/

MDRU-Mineral Deposit Research Unit is a collaborative research venture between the minerals industry and The University of British Columbia's (UBC) Department of Earth, Ocean and Atmospheric Sciences. We are an integrated geological, geochemical and geophysical research group that solves exploration and mining problems with applied geoscientific research projects. These projects form the basis for graduate student education and training and their eventual employment in the industry. We also provide professional development opportunities to the minerals community through short courses, workshops and in-house training. We are international in scope with research projects and graduate students from throughout the world with a current emphasis on the western margins of North and South Americas, as well as eastern Europe and central Eurasia.

About Jaxon Mining Inc.

Jaxon is a precious and base metals exploration company with a regional focus on Western Canada. The Company is currently focused on advancing its Red Springs Project in north-central British Columbia.

ON BEHALF OF THE BOARD OF DIRECTORS
Jaxon Mining Inc.

"John King Burns"

John King Burns, Chairman

For more information please contact:

Investor Relations

Kaye Wynn Consulting
T: 604-558-2630
TF: 1-888-280-8128
E: info@kayewynn.com

Freeform Communications
T: 604-243-0499
E: enquiries@freeform.com

Corporate
T: 604-398-5394
E: info@jaxonmining.com
www.jaxonmining.com

This news release may contain forward-looking information, which is not comprised of historical facts. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward-looking information in this news release may include, but is not limited to, the Company's objectives, goals or future plans. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, those risks set out in the Company's public documents filed on SEDAR. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames, or at all. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law. Neither TSX Venture exchange nor its Regulations Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/51156