Standard Lithium Successfully Completes Proof-of-Concept of Modern Lithium Extraction and Crystallisation Technology
HIGHLIGHTS
- >99.9% purity lithium carbonate produced (aka ‘3 nines’)
- Successful proof-of-concept of modern lithium processing technology
- Start-to-finish direct extraction of lithium from brine in Arkansas; production of purified, concentrated intermediate; final conversion to high-purity battery quality lithium carbonate end-product
VANCOUVER, Dec. 03, 2020 - Standard Lithium Ltd. (“Standard Lithium” or the “Company”) (TSXV: SLL) (OTCQX: STLHF) (FRA: S5L), an innovative technology and lithium project development company is pleased to announce that it has successfully completed the start-to-finish proof of concept of its modern lithium processing technology. Successful operation of the technology at pre-commercial continuous scale has directly extracted lithium from brine in Arkansas and produced a purified, concentrated intermediate product (LiCl solution) which has been converted to better than battery quality lithium carbonate final product.
Better Than Battery Quality
The culmination of the proof-of-concept was to convert and crystallise the LiCl solution produced by the Company’s first-of-its-kind Direct Lithium Extraction (DLE) Demonstration Plant (see news release dated September 09th 2020). The LiCl solution shipped from Arkansas was concentrated further using industry-standard reverse osmosis technology, and then converted at the Company’s SiFT Pilot Plant located in British Columbia, Canada. The lithium carbonate recrystallised as per the SiFT technology and the resulting high-purity lithium carbonate was sent for third party chemical analysis. Photos of the lithium carbonate being dried are provided as Figure 1 below; real-time images of the lithium carbonate as it formed in the hot reactor are shown as Figure 2, and the third party analysis of the final product is provided as Table 1 below.
Figure 1 accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/063e77af-dac1-4349-b723-492f817029a3
Figure 2 accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/aacdfed1-ece0-46c6-b6ec-3c7449da94ae
Table 1: Analysis of Lithium Carbonate
Contaminant | Concentration in Lithium Carbonate (ppm) |
Chloride | 141 |
Sulphate | <50 |
Aluminium | 14 |
Barium | 5.34 |
Calcium | 179 |
Chromium | 2 |
Copper | <0.8 |
Iron | 10 |
Potassium | <10 |
Magnesium | 58.5 |
Manganese | <0.4 |
Sodium | 229 |
Strontium | 42 |
Titanium | 2.4 |
Yttrium | 0.8 |
Zinc | 3 |
Silicon | 81 |
Total Impurities | <785 |
Lithium Carbonate Purity | >99.92 wt.% |
As seen in Table 1, the lithium carbonate produced from the Arkansas brine is of very high purity (>99.92 wt.%), as opposed to the normal industry benchmark for ‘battery quality’ which is usually understood to be >99.5 wt.%. Conversion of the lithium chloride to carbonate using a conventional process is ongoing, and is being performed by a third-party OEM/vendor in Plainfield, Illinois. Data from these tests will be released when available.
Ongoing Optimisation and Pre-Commercial Operations
Standard Lithium continues to operate both the LiSTR DLE plant in Arkansas and the SiFT Pilot Plant in BC in order to gather additional operational data and refine design parameters to allow for future commercial scaling of the technologies. When current pandemic-related restrictions are eased or lifted, it is still the Company’s intention to relocate the SiFT plant to Arkansas so that it can be tied into the existing plant and operate on a continuous and integrated basis. An overview image of the SiFT plant is shown in Figure 3 below.
Figure 3 accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/e209ca0f-d9f2-433d-b25c-2da9c7bc07a7
Dr. Andy Robinson, President and COO of Standard Lithium commented “this is an extremely important milestone for Standard Lithium. We’ve managed to demonstrate the first of its kind continuous extraction of lithium from Smackover brine and we’ve converted it into better than battery quality material. Not only that, but we’ve done it at a large scale, which now allows us to keep on working towards commercialisation. This proof of concept validates our approach over the past four years, and is testament to the hard work and ingenuity of our deep and diverse technical team.”
Quality Assurance
Dr. Ron Molnar, Professional Metallurgical Engineer (Ontario P.E.# 100111288), is a qualified person as defined by NI 43-101, and has reviewed and approved the scientific and technical information that forms the basis for this news release. Dr. Molnar is independent of the Company.
About Standard Lithium Ltd.
Standard Lithium (TSXV: SLL) is an innovative technology and lithium development company. The company’s flagship project is located in southern Arkansas, where it is engaged in the testing and proving of the commercial viability of lithium extraction from over 150,000 acres of permitted brine operations. The Company has commissioned its first-of-a-kind industrial scale Direct Lithium Extraction Demonstration Plant at LANXESS’ South Plant facility in southern Arkansas. The Demonstration Plant utilizes the Company’s proprietary LiSTR technology to selectively extract lithium from LANXESS’ tailbrine. The Demonstration Plant is being used for proof-of-concept and commercial feasibility studies. The scalable, environmentally-friendly process eliminates the use of evaporation ponds, reduces processing time from months to hours and greatly increases the effective recovery of lithium. The company is also pursuing the resource development of over 30,000 acres of separate brine leases located in southwestern Arkansas and approximately 45,000 acres of mineral leases located in the Mojave Desert in San Bernardino County, California.
Standard Lithium is listed on the TSX Venture Exchange under the trading symbol “SLL”; quoted on the OTC - Nasdaq Intl Designation under the symbol “STLHF”; and on the Frankfurt Stock Exchange under the symbol “S5L”. Please visit the Company’s website at www.standardlithium.com.
On behalf of the Board of Standard Lithium Ltd.
Robert Mintak, CEO & Director
For further information, contact Anthony Alvaro at (604) 240 4793
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This news release may contain certain “Forward-Looking Statements” within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When used in this news release, the words “anticipate”, “believe”, “estimate”, “expect”, “target, “plan”, “forecast”, “may”, “schedule” and other similar words or expressions identify forward-looking statements or information. These forward-looking statements or information may relate to future prices of commodities, accuracy of mineral or resource exploration activity, reserves or resources, regulatory or government requirements or approvals, the reliability of third party information, continued access to mineral properties or infrastructure, fluctuations in the market for lithium and its derivatives, changes in exploration costs and government regulation in Canada and the United States, and other factors or information. Such statements represent the Company’s current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affections such statements and information other than as required by applicable laws, rules and regulations.