SPC Nickel Announces Additional Successful Drill Results from Janes Ni-Cu-PGM Project
13.07.2021 | Newsfile
![SPC Nickel Announces Additional Successful Drill Results from Janes Ni-Cu-PGM Project](https://www.goldseiten.de/media/goldseiten-news.jpg)
Grant Mourre, CEO and President of SPC Nickel Corp. commented, "We are pleased with the progress to date at Janes, as the reported drilling results continue to demonstrate the potential for near-surface PGM-rich mineralization. Data for the remaining 7 holes are due in the next few weeks and once available, will be incorporated into the geological model that will allow us to better understand the controls of mineralization. Based on the results to date, we feel the property has the potential to host additional zones of PGM-rich mineralization across the 2,900 hectare property. Our exploration activities to date have been concentrated, however, on a small area representing less than 10% of the total Janes Property. A full interpretation of the potential at Janes and planning for next steps will be undertaken once all the results are received."
Assay Results: Table 1: Assay results from the Trench 1 target area. Assay results from JP-21-001 were previously reported in SPC Nickel's press release dated June 17, 2021.
To view an enhanced version of Table 1, please visit:
https://orders.newsfilecorp.com/files/6510/90046_spctable1.jpg
Note: 3E PGM represents Pd g/t + Pt g/t + Au g/t. Equivalent values calculated using the 30-day average metal prices of US$8.03/lb. Ni, US$4.54/lb. Cu, US$1,187/oz Pt, US$2,833/oz Pd, US$1,882/oz Au and $27.77/oz Ag listed in the June 17, 2021, press release. Recoveries were not used in calculations. Note that all drilling intervals are down-hole lengths. True thicknesses cannot be estimated with available information.
The Trench 1 drill program is designed to test the lateral and vertical continuity of the mineralized zone that is exposed at surface in a 35 metre by 30 metres mineralized outcrop. Mineralization at the Trench 1 area is dominated by disseminated sulphides, hosted within a hypersthene-bearing gabbro unit situated 10 metres above the basal contact of the Nipissing sill and the surrounding metasediments. Earlier this year, SPC Nickel completed a channel sampling program at the Trench 1 showing that returned 2.25 g/t Pd, 0.41 g/t Pt, 0.26 g/t Au, 1.09 % Cu and 0.50 % Ni over 22.00 metres (see SPC Nickel Press Release dated May 25, 2021).
The Trench 1 drill program consisted of 16 holes ranging in depth from 27 to 51 metres that tested an area measuring approximately 75 metres by 45 metres. Results from the first nine holes are presented in Table 1 while the remaining holes are being processed with results expected over the next 2 weeks. Table 2 provides collar locations, azimuths and dips for the drill hole included in this release as well as the remaining holes completed in the Trench 1 area.
Refer to Figure 1 for a map of the Trench 1 area displaying the collar locations and drill hole traces of the holes listed in Table 2, as well as historic drill holes completed in the area. Assay results for the drill holes listed in Table 1 are identified by the blue boxes while assay results for all historic holes are displayed in white boxes.
Table 2: Drill collar locations, azimuths and dips for drill holes completed at the Trench 1 area.
Drill Collar Locations (NAD 83 UTM Zone 17N)
Drill hole Easting Northing Elevation Depth (m) Dip Azimuth Status
JP-21-001 547205 5171348 252 51 -90 300 Previously released
JP-21-002 547205 5171348 252 27 -45 300 Included in release
JP-21-003 547205 5171348 252 27 -45 260 Included in release
JP-21-004 547205 5171348 252 30 -45 200 Included in release
JP-21-005 547215 5171360 251 36 -90 300 Included in release
JP-21-006 547215 5171360 251 27 -45 300 Included in release
JP-21-007 547215 5171360 251 27 -45 260 Included in release
JP-21-008 547215 5171360 251 51 -45 200 Included in release
JP-21-009 547225 5171358 250 45 -90 300 Included in release
JP-21-010 547224 5171344 250 42 -50 300 Pending
JP-21-011 547223 5171344 250 51 -90 300 Pending
JP-21-012 547220 5171329 250 51 -50 300 Pending
JP-21-013 547219 5171329 250 51 -90 300 Pending
JP-21-014 547219 5171313 250 51 -90 300 Pending
JP-21-017 547226 5171287 254 30 -90 300 Pending
JP-21-018 547198 5171327 251 50 -90 300 Pending
Figure 1: Plan map of the Trench 1 area. Historic drill collars are represented by red diamonds while the 2021 drill collars are represented by the blue diamonds. Assays results from the 2021 program are shown in the blue boxes while all historic drill intersections are in white boxes.
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/6510/90046_c02209f2a4412a8d_003full.jpg
References for historic assay results shown in Figure 1.
- Assessment Report 2.19887, Diamond Drill Program Janes Property, Pacific North West Capital Corporation, June 25, 1999.
- Assessment Report 2.20720, Work Report: Phase II Diamond Drill Program Janes Property, Pacific North West Capital Corporation, December 31, 1999.
- Assessment Report 2.22235, Work Report: Phase III Diamond Drill Program Janes Property, Pacific North West Capital Corporation, November 28, 2001.
- Assessment Report 2.20008291, 2007 Diamond Drilling Program: Chiniguchi River Property, GoldTrain Resources Inc., February 19, 2010.
Qualified Person
The technical elements of this news release have been approved by Mr. Grant Mourre, P.Geo. (PGO), CEO and President of SPC Nickel Corp. and a Qualified Person under National Instrument 43-101. The historical information shown in this news release was obtained from historical work reports filed by Pacific North West Corp. and GoldTrain Resources Inc. with the Ontario Ministry of Energy, Northern Development and Mines and have not been independently verified by a Qualified Person as defined by NI 43 101.
About SPC Nickel Corp.
SPC Nickel Corp. is a new Canadian public corporation focused on exploring for Ni-Cu-PGMs within the world class Sudbury Mining Camp. The Company is currently exploring its key 100% owned exploration projects Aer-Kidd and Lockerby East both located in the heart of the historic Sudbury Mining Camp and holds an option to acquire 100% interest in the Janes project located approximately 50 km NE of Sudbury. The Company's flagship project, Aer-Kidd, is strategically located between two world class assets in the producing Totten Mine (Vale) and the large, high-grade Victoria development project (KGHM). The Company will initially focus on advancing its key Sudbury assets with a vision of growing to a pre-eminent North American nickel exploration company. Additional information regarding the Company and its projects can be found at www.spcnickel.com.
Quality Assurance and Quality Control
SPC Nickel follows rigorous sampling and analytical protocols that meet or exceed industry standards. Core samples are stored in a secured area until transport in batches to the ALS facility in Sudbury, Ontario, Canada. Sample batches include certified reference materials, blank, and duplicate samples that are then processed under the control of ALS. All samples were analyzed in Vancouver by ALS Chemex. Platinum, palladium, and gold values were determined together using standard lead oxide collection fire assay and ICP-AES finish. Over limits for Pd were determined using fire assay and AAS. Base metal values were determined using sodium peroxide fusion and ICP-AES finish. Silver values were determined using an aqua regia digestions and an AAS finish. A Certified Reference Material (CRM) standard, blank or duplicate is inserted on every 10th sample in the following order: CRM, blank, CRM, duplicate. The cycle repeats every 40 samples, thus ensuring that 10% of samples submitted are control samples.
Cautionary Note on Forward-Looking Information
Except for statements of historical fact contained herein, the information in this news release constitutes "forward-looking information" within the meaning of Canadian securities law. Such forward-looking information may be identified by words such as "plans", "proposes", "estimates", "intends", "expects", "believes", "may", "will" and include without limitation, statements regarding estimated capital and operating costs, expected production timeline, benefits of updated development plans, foreign exchange assumptions and regulatory approvals. There can be no assurance that such statements will prove to be accurate; actual results and future events could differ materially from such statements. Factors that could cause actual results to differ materially include, among others, metal prices, competition, risks inherent in the mining industry, and regulatory risks. Most of these factors are outside the control of the Company. Investors are cautioned not to put undue reliance on forward-looking information. Except as otherwise required by applicable securities statutes or regulation, the Company expressly disclaims any intent or obligation to update publicly forward-looking information, whether as a result of new information, future events or otherwise.
Further information is available at www.spcnickel.com by contacting:
Grant Mourre, Chief Executive Officer
SPC Nickel Corp.
Tel: (705) 669-1777
Email: gmourre@spcnickel.com