Pancon Intersects 25 Meters of 0.96 g/t Au and 0.2% Cu, Further Extending Gold-Copper Zone at Brewer

Toronto, August 31, 2021 - Pancontinental Resources Corp. (TSXV: PUC) (OTCQB: PUCCF) ("Pancon" or the "Company") reports gold and multielement geochemistry results for two more diamond drill holes in Phase 2 of the Company's fully funded 10,000-meter (m) maiden drill program at its flagship Brewer Gold & Copper Project (see Table 1). Holes 11 and 12 are vertical holes located to the north and northwest of discovery Holes 4 and 5 and collared outside the northern pit wall of the former mine (see Figure 1). In addition, Pancon reports that preliminary logging of step-out Hole 16, located 350 m north-northwest of the former mine, identified intergrown chalcopyrite-bornite mineralization at about 225 m below surface (see Photo 1).

Highlights:

• Hole 11 intersected 25.2 m of 0.96 g/t Au, 0.21% Cu and 1.31 g/t AuEq; including: 5.6 m of 1.73 g/t Au, 0.42% Cu and 2.41 g/t AuEq
• Hole 12 intersected 15.5 m of 0.9 g/t Au and 4.57 m of 2.32 g/t Au

Pancon President and CEO Layton Croft stated: "Holes 11 and 12 extend, to the north and west, the gold-copper mineralized zone below the former Brewer mine. This zone now spans 275 m on a north-south axis, with a mineralized hole 50 m to the east and another mineralized hole 50 m to the west (see Figure 2). The bigger picture is getting clearer. Our next phase of drilling will include a grid of holes to expand our understanding of this gold-copper mineralized zone below the former mine, with the objective of defining a maiden resource in 2022."

Croft continued: "Mineral zonation is a useful tool for vectoring in exploration, and recent discoveries make this a possibility at Brewer. Previously identified copper minerals associated with gold-copper mineralization at Brewer are from much shallower epithermal mineralization dominated by chalcocite group minerals and enargite within hydrothermal breccias, but without a chalcopyrite-bornite assemblage. Our identification of intergrown chalcopyrite-bornite mineralization 350 m north-northwest of the former mine suggests that an originally deeper, higher temperature zone of the Brewer mineralizing system was transported to shallower levels during post-mineralization deformation and mountain building. This zonation would suggest an opportunity for vectoring porphyry copper style mineralization at shallow depths, possibly north of the former mine."

Table 1: Gold Assays and Multielement Geochemistry Results for Diamond Holes 11 and 12

(see here for Certificates of Analysis and complete results)

*AuEq calculated using spot price of Au: $1,790.50/oz and Cu: $4.25/lb

See Quality Assurance and Quality Control Statement below regarding assaying techniques. Intervals are core lengths and are not presumed to be true thicknesses.

Figure 1: Select Phase 1 Hole Locations and Results, All Phase 2 Hole Locations and Select Gold-Copper Results for Holes 2, 4, 5, 8, 9, 10, 11 and 12

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5156/94914_6ffc0b2c645cdbd6_003full.jpg

Figure 2 shows an updated North-South cross section, looking west, of the former Brewer Gold Mine main pit, with gold-copper results for vertical diamond holes 11, 5, 4, 8 and 9, which span 275 m on a north-south axis. Hole 12 is located 50 m west-northwest of hole 11, and thus is not shown in this cross section.

Figure 2: North-South Cross Section with Gold-Copper Results for Holes 4, 5, 8, 9 and 11

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5156/94914_6ffc0b2c645cdbd6_004full.jpg

Photo 1: Hole 16 Core With Chalcopyrite & Bornite Copper Mineralization ~225 M Below Surface

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5156/94914_6ffc0b2c645cdbd6_005full.jpg

Phase 2 Drilling Update

Pancon's Phase 2 diamond drill program follows the success of Phase 1 drilling, as reported in the Company's April 27, 2021 news release, with Hole 5 intersecting 181.6 meters of 1.24 g/t Au and 0.27% Cu (1.67 g/t AuEq) and Hole 4 intersecting 115.6 meters of 0.91 g/t Au and 0.17% Cu (1.18 AuEq). To date, Pancon has completed 17 diamond drill holes at the Brewer Gold & Copper Project over two phases. Phase 3 will commence in September. In September and October the Company expects results for Holes 13-17 as well as results for the 104 rotary air blast (RAB) holes drilled in June (see news release of June 8, 2021).

Quality Assurance and Quality Control Statement, Notes and Assumptions

Phase 2 exploration diamond core drilling was HQ and NQ size. The core was logged and marked for sampling and assaying by geologists contracted by Pancon. Samples, typically 1.5 meters in length, were sawn in half using a diamond core saw and one-half of the core was placed in sample bags and tagged with unique sample numbers, while the remaining half was kept in the core box for storage. Each bagged core sample was shipped to SGS Labs in Ontario, Canada, where it was dried, crushed and pulverized to >80% passing -200 mesh.

Gold was analyzed by fire assay (30 g) with an AAS (atomic absorption) finish, with a lower detection limit of 0.005 g/t gold. Samples containing greater than 10.0 g/t gold were analyzed by fire assay with a gravimetric finish. Multielement analyses, including base metals and rare earth elements, were analyzed with ICP-MS/ICP-AES (inductively coupled argon plasma mass spectrometry/atomic emission spectroscopy). Strict sampling and QA/QC protocols are followed, and assay integrity is monitored internally with a quality control program including the insertion of standards, blanks, and duplicates in the sample stream on a regular basis.

Gold equivalent values reported in this release were calculated using the following prices: a gold spot price of US$1,790.50/oz and a copper spot price of US$4.25/lb. Gold equivalent values can be calculated using the following formula: AuEq (g/t) = Au (g/t) + k*Cu (g/t); where k = price_Cu(US$/kg)/price_Au(US$/kg). Recoveries of individual elements can not generally be determined based on equivalent values and fluctuating metal prices will change the value of 'k' and therefore the gold equivalent values.

Qualified Person

The technical information in this news release has been prepared in accordance with Canadian regulatory requirements as set out in NI 43-101 and reviewed and approved by Richard "Criss" Capps, PhD, RPG, SME REG GEO, a Qualified Person as defined by NI 43-101.

About Pancon

Pancon is a Canadian junior mining company focused on exploring the prolific and underexplored Carolina Slate Belt in Chesterfield County, South Carolina, USA. In January 2020, Pancon won the exclusive right to explore the former Brewer Gold Mine property. The Brewer Gold & Copper Project, on the gold-rich Carolina Slate Belt in South Carolina, is where the former shallow Brewer Gold Mine produced 178,000 ounces of oxide gold between 1987-1995 from open pits that extended to 65-meter depths, where copper and gold-rich sulphides were exposed but could not be processed by the oxide heap leach processing facility (Zwaschka, M. and Scheetz J.W., 1995, Detailed Mine Geology of the Brewer Gold Mine, Jefferson, South Carolina, Society of Economic Geologists). Until Pancon, Brewer hadn't been explored since 1997, and most of the tools used previously to explore the property have since been updated with more advanced technologies. Brewer is a high sulphidation system driven by a sub-volcanic intrusive and possibly connected to a large copper-gold porphyry system at depth, as indicated by: widely known prospective geology, including diatreme breccias; associated high sulphidation alteration; gold and copper mineralization; and geophysics (Schmidt, R.G., 1978, The Potential for Porphyry Copper-Molybdenum Deposits in the Eastern United States, U.S. Geological Survey). Pancon's 100%-owned, 1,960-acre Jefferson Gold Project nearly completely surrounds the 1,000-acre former Brewer Gold Mine property, and both Jefferson and Brewer are located 12 kilometers northeast along trend from the producing Haile Gold Mine, which produced 137,413 ounces of gold in 2020 (https://oceanagold.com/operation/haile/).

For further information, please contact:

Layton Croft, President & CEO or Jeanny So, Manager, External Relations
E: info@panconresources.com
T: +1.647.202.0994

For additional information please visit our new website at http://www.panconresources.com/ and our Twitter feed: @PanconResources.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, and other risks involved in the mineral exploration and development industry, including those risks set out in the Company's management's discussion and analysis as filed under the Company's profile at www.sedar.com. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including that all necessary governmental and regulatory approvals will be received as and when expected. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/94914