Suche
 
Folgen Sie uns auf:

American Battery Technology Company Hires Industry Expert as Director of Research and Development

24.03.2022  |  GlobeNewswire

Reno, March 24, 2022 - American Battery Technology Company (ABTC) (OTCQB: ABML), an American critical minerals and lithium-ion battery recycling company, welcomes new Director of Research and Development, Dr. York Smith.

Bringing over 15 years of research and development experience, Smith has an extensive background in applied sciences in chemical engineering and sustainable technology process development, with specific focuses on extractive metallurgy, electrochemistry, and non-ferrous metal recycling. He has worked as an assistant professor at the University of Utah's Materials Science and Engineering Department for the past six years, where he recently was awarded the distinguished honor of serving as part of the Henry Krumb Lecturer Series issued by the Society of Mining, Metallurgy, & Exploration for his work focused on "Lithium: Resources, Recovery, and Recycling." While at the University of Utah, he led a team of interdisciplinary researchers developing innovative and sustainable technologies for lithium extraction from primary and secondary resources including recycling technologies. Recently, a team he led comprised of members from the University of Utah, Cornell University, and UC Riverside was selected as Phase I finalists in the national competition "American-Made Challenges: Geothermal Lithium Extraction Prize," hosted by the U.S. Department of Energy.

Dr. Smith received a B.S. and M.S. in chemical engineering from the University of Nevada, Reno, and his Ph.D. in metallurgical engineering from the University of Utah. Dr. Smith was also awarded a fellowship as a postdoctoral scholar through the U.S. Department of Energy, Energy Efficiency and Renewable Energy, SunShot Initiative to examine use of eddy current separation methods for recycling of end-of-life solar panels. His previous roles include chief process engineer for a sensor electrode manufacturing company, and research and development engineer at the start-up Nanosynth Materials and Sensors where he hosted a talk at TEDxReno. He has also held research assistant positions at the University of Utah, University of Nevada, Reno, and the National Centre for Catalysis Research at the Indian Institute of Technology, Madras, with work ranging from developing catalytic materials for hydrogen generation to sensor materials for health monitoring and disease detection.

Smith has published extensively with over 50 journal publications and over 2,000 citations. He serves on the strategic advisory committee of The REMADE Institute, an organization of industry innovators, academic researchers, and national labs to enhance the nation's industrial competitiveness and lead the transition to a Circular Economy in the U.S.; is currently a member of the Society for Mining, Metallurgy and Exploration, serving as a Session Co-Chair for their Industrial Minerals and Aggregate Division (2020); and is an associate editor for Mining, Metallurgy & Exploration, an international, peer-reviewed scientific journal. Recently, Smith also provided the science behind a collaboration of a video art installation in New York's Time Square that was part of a larger exhibit called "Reverse Alchemy" led by Jessica Segall.

"Much of my prior research has focused on solving some of the fundamental challenges related to materials processing and sustainability," said American Battery Technology Company Director of Research and Development, Dr. York Smith. "I am excited for this opportunity to work with the talented ABTC team to apply and utilize my research and development experiences and fundamental academic research in this new role. One of the many things that attracted me to this new role with ABTC is the commitment of the company in developing scientifically sound, environmentally low-impact technologies vital for materials critical to electric vehicles and a sustainable future."

In this new role, Smith will oversee the ABTC team of scientists at the company's Research Development Center currently located at the University of Nevada Reno's Nevada Center for Applied Research (NCAR) and within the cleantech incubator Greentown Labs. Diligently focused on developing and evolving in-house, battery metals extraction technologies, the ABTC technology team supports continued work on their US Advanced Battery Consortium and Department of Energy funded collaboration with strategic partners BASF and C4V to demonstrate that battery grade metals nickel, cobalt, manganese, and lithium hydroxide can be manufactured from recycled materials at lower cost, lower environmental impact, and with higher domestic U.S. sourced content than conventional virgin sourced metals. As well, Smith and the technology team continue to drive the company's efforts to design and optimize its internally developed processing train for the manufacturing of battery cathode grade lithium hydroxide from Nevada-based sedimentary claystone resources as part ABTC's Tonopah Flats Lithium Exploration Project which is supported by its recently awarded grant from the U.S. Department of Energy Advanced Manufacturing Office in partnership with DuPont. Smith will also support the continued construction of ABTC's Global Development Center, which will include onsite analytical and process laboratories, along with pilot bays for validating next-generation technologies, and will be housed in their pre-commercial lithium-ion battery recycling plant once completed.

"On behalf of the entire ABTC team, I am thrilled to welcome York as our new Director of Research and Development," stated American Battery Technology Company CEO Ryan Melsert. "The experience and leadership that York brings to our research and development team will further strengthen and expand the maturation and commercialization of our battery metals extraction technologies supporting our continued and diligent focus on our growth strategies to address these global challenges at scale."

For more information, please visit: www.americanbatterytechnology.com.

About American Battery Technology Company
American Battery Technology Company, which recently changed its name from American Battery Metals Corp., is uniquely positioned to supply low-cost, low-environmental impact, and domestically sourced battery metals through its three divisions: lithium-ion battery recycling, primary battery metal extraction technologies, and primary resources development.

American Battery Technology Company has built a clean technology platform that is used to provide a key source of domestically manufactured critical and strategic battery metals to help meet the near insatiable demand from the electric vehicle, electrical grid storage, and consumer electronics industries. This ESG-principled platform works to create a closed-loop circular economy for battery metals that champions ethical and environmentally sustainable sourcing of critical and strategic materials.

Forward-Looking Statements
This press release contains "forward-looking statements" within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact, are "forward-looking statements." Although the American Battery Technology Company's (the "Company) management believes that such forward-looking statements are reasonable, it cannot guarantee that such expectations are, or will be, correct. These forward-looking statements involve a number of risks and uncertainties, which could cause the Company's future results to differ materially from those anticipated. Potential risks and uncertainties include, among others, interpretations or reinterpretations of geologic information, unfavorable exploration results, inability to obtain permits required for future exploration, development or production, general economic conditions and conditions affecting the industries in which the Company operates; the uncertainty of regulatory requirements and approvals; fluctuating mineral and commodity prices, final investment approval and the ability to obtain necessary financing on acceptable terms or at all. Additional information regarding the factors that may cause actual results to differ materially from these forward-looking statements is available in the Company's filings with the Securities and Exchange Commission, including the Annual Report on Form 10-K for the year ended June 30, 2021. The Company assumes no obligation to update any of the information contained or referenced in this press release.

###

American Battery Technology Company
Media Contact:
Tiffiany Moehring
tmoehring@batterymetals.com
720-254-1556

Attachment

  • Dr. York Smith

Tiffiany Moehring American Battery Technology Company 720-254-1556 tmoehring@batterymetals.com


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
American Battery Metals Corp.
Bergbau
A2PJ3E
US02451V1017
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"