Suche
 
Folgen Sie uns auf:

Lion One Drilling Extends Deep Feeder Zone 500 to 1,150m at Tuvatu Alkaline Gold Project in Fiji

08.04.2022  |  Newsfile

North Vancouver, April 8, 2022 - Lion One Metals Ltd. (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) ("Lion One" or the "Company") is pleased to report that ongoing drilling has returned multiple high grade intercepts, significantly extended the drill-confirmed vertical extent of Deep Feeder Zone 500, and further confirmed the alkaline deposit model and depth potential of the Tuvatu Alkaline Gold Project in Fiji.

Extending Deep Feeder Zone 500

The latest drilling at Tuvatu extends Deep Feeder Zone 500 approximately 300 meters below the base of the current resource, with two further holes intersecting high grade mineralization an additional 350m deeper, demonstrating vertical continuity of the Tuvatu gold system of at least 1,150m. The recent drilling comprised 11 drill holes for 9113.4 meters of drilling. (See Figure 1)

Top Intercepts (See Table 1 for High Grade Highlights and Table 2 for Significant Intercepts)
23.14 g/t Au over 3.00m inc. 118.60 g/t Au over 0.30m from 571.50m (TUG 138)
25.83 g/t Au over 2.70m inc. 43.64 g/t Au over 0.30m from 582.50m (TUDDH 573W1)
87.83 g/t Au over 1.50m inc. 108.41 g/t Au over 0.60m from 445.10m (TUG 136)

Further Confirmation of Alkaline Gold System Model

This deep extensional drilling not only demonstrates exceptional grades at depth but further confirms the potential for a deep-rooted gold bearing alkaline gold system like the example at the nearby Vatukoula gold system in Fiji where historical gold production exceeds 7 million ounces and exploration (and gold production) is ongoing.

Potential for Substantial Resource Increase

Sergio Cattalani, Lion One's Senior Vice President Exploration, commented "With the completion of the re-entry hole TUDDH-494, high-grade mineralization in the deep feeder Zone 500 has now been demonstrated to extend for over 650 meters vertically below the base of the current resource. Within this interval, bonanza grades over realistic mining widths have been confirmed and modelled as multiple sub-parallel to locally interconnected lodes with highest grades forming a steeply (approximately -80°) NE-plunging shoot of about 200m wide, by about 90m thick, and approximately 300m vertically below the overlying resource. While this upper 300m portion of the feeder zone alone should add significantly to the overall resource at Tuvatu, the lower 350m remains essentially undrilled.

Table 1: High Grade Highlights from Latest Zone 500 Drilling

TUG-136
10.14 g/t Au over 3.0m from 429.10m
inc. 34.56 g/t Au over 0.30m from 429.40m
and 20.13 g/t Au over 0.60m from 431.50m
87.83 g/t Au over 1.50m from 445.10m
inc. 108.41 g/t Au over 0.60m from 445.10m
inc. 176.50 g/t Au over 0.30m from 445.40m
and 222.00 g/t Au over 0.30m from 446.30m
TUG-138
15.21 g/t Au over 0.60m from 541.5m
inc. 26.45 g/t Au over 0.30m from 541.50m
114.80 g/t Au over 0.30m from 561.00m
23.14 g/t Au over 3.0m from 571.50m
inc. 118.60 g/t Au over 0.30m from 571.50m
and 51.43 g/t Au over 0.30m from 572.40m
and 49.72 g/t Au over 0.30m from 573.00m
TUDDH-573W1
25.83 g/t Au over 2.70m from 582.50m
inc. 43.64 g/t Au over 0.30m from 582.50m
and 9.62 g/t Au over 0.30m from 583.10m
and 33.77 g/t Au over 1.50m from 583.40m
TUDDH-494 re-entry
12.19 g/t Au over 0.30m from 1,106.30m

Deep Feeder Zone 500 Discovery

Results of 11 drill holes (totalling 9113.4m) are reported here in Table 2; corresponding collar coordinates for previously unreported holes are included in Table 3. These results follow previously reported drilling that totaled 17 drill holes, that had partially defined the presence of a deep high-grade feeder structure, beginning with the discovery by hole TUDDH500 announced in July, 2020 (see Lion One Drills High-Grade Feeder Mineralization in Diamond Drill Hole TUDDH500 - Lion One Metals). Discovery hole TUDDH500 and two subsequent wedge holes drilled into the mineralized structure at a low angle to its strike returned outstanding results, including 12.7 m at 55.43 g/t Au from 571.0 m depth, including 4.7 m at 144.81 g/t Au in hole TUDDH500; 3.3 m of 85.70 g/t Au from 591.6 m depth, including 0.3 m at 305 g/t Au and 0.3 m at 310 g/t Au in TUDDH500W1; and 6.5 m at 7.32 g/t Au from 674.0 m depth, including 0.5 m at 67.40 g/t Au in TUDDH500W2. Subsequent drilling was re-oriented to intersect the mineralized structure at higher angles of incidence yielding more realistic thicknesses of individual lodes (for example: 2.30 m at 55.44 g/t Au from 575.7 m depth, including 1.32 m at 96.13 g/t Au in TUDDH533; 1.80 m at 34.8 g/t Au at 629.3 m depth, and 2.40 m at 24.31 g/t Au from 632.3 m depth, in hole TUDDH544W2; 3.47 m at 20.71 g/t from 703.7 m depth, including 0.23 m at 294.5 g/t Au in TUDDH514). Drill testing across the strike direction of the mineralized structure has also led to the discovery and subsequent testing of additional sub-parallel structures.

Ongoing deep drill program is designed to systematically test the strike extent, and down-dip continuity of the high-grade mineralized structure, as well as to test for the presence of additional sub-parallel mineralized lodes. The program also included several aggressive step-out drill holes along strike (TUDDH561 and 571, for example), and down dip (TUDDH573W1, and TUDDH494 re-entry). Where feasible, re-entry of pre-existing drill holes allowed for testing of the structure while saving on total drill meterage (TUDDH525, and 494 re-entry).

Zone 500 Orientation and Geometry

Results to date have indicated that the mineralized high-grade feeder zone consists of at least 4 principal vein arrays striking between N020° and N030°, corresponding in orientation to UR2 And UR4 lodes in the orebody above. These 4 structures are shown as separate lodes in Figure 1. A well-developed cross-structure oriented at about N055° forms a linking structure to these lodes, with the intersection lineation forming a steeply NE-plunging mineralized shoot that is about 200 m wide, occurring over a total thickness of approximately 90 m, and is continuously mineralized for a minimum of 300 m down plunge. Two isolated drill intercepts directly down-plunge from the highly mineralized shoot have returned 10.5 g/t Au and 12.2 g/t Au, from holes TUDDH514 and TUDDH494 respectively, suggesting that the mineralized structure may extend for at least an additional 350 m for a total mineralized zone that appears to extend up to 650 m below the base of the current inferred resource (Figure 2). In accordance with one of the well-documented, and defining characteristics of large alkaline Au system (e.g. Cripple Creek, Colorado), this corresponds to at least 1150 m of near-continuous vertical high-grade Au mineralization. Additionally, the strike extent is not closed to the NE as drill hole TUDDH571 intersected 12.5 g/t Au at 482.1 m downhole which is directly on strike to one of the modelled 500 Zone lodes (Figure 2).

The lower 350 m currently remains essentially undrilled with the exception of two intercepts of 10.5 g/t Au from TUDDH514 and 12.2 g/t Au from TUDDH494 re-entry at approximately 1120 m vertically below surface. The latter intercept, which represents the deepest documented mineralized intercept to date at Tuvatu, occurs in a strongly altered monzonite and exhibits the coexistence of native gold and bornite (Figure 3). Additional observations of visible gold and bornite mineralization from even deeper in hole TUDDH494 have been made at 1185 m and 1192 m downhole depths although final assay results for these samples are still pending.

Mineralized intercepts at 1106 m and 1192 m downhole depths in TUDDH494 re-entry hole, exhibit co-existence of visible gold, bornite, chalcopyrite and magnetite, developed in association with discrete bands to irregular anastomosing zones of pervasively developed epidote-orthoclase-magnetite-biotite-actinolite? alteration in monzonite. Multiple occurrences of minor (<<1%) chalcopyrite and bornite without visible gold have also been documented to at least 1285 m downhole depth in TUDDH494. Although observations are still very preliminary in extent, if confirmed by additional drilling, the mineral assemblage described above suggests that the high-grade 500 Zone feeder may be rooted in a monzonite stock that is altered by a high-temperature magmatic-hydrothermal potassic to calc-potassic assemblage mineralized in both Au and Cu (Figure 3). Possible analogues to such mineralization include Newcrest's Ridgeway Au-Cu deposit in the Cadia Intrusive Complex, NSW, Australia, and Centerra's Mt. Milligan Au-Cu deposit, BC, Canada.



Figure 3: Photographs of the deep intercept from drill hole TUDDH494 at 1106 m depth that returned 12.2 g/t Au and 0.39% Cu hosted in a pervasively altered monzonite exhibiting an assemblage of epidote-actinolite?-orthoclase-biotite-magnetite-bornite and native gold forming an irregular band at low-angle to core axis.

To view an enhanced version of Figure 3, please visit:
https://orders.newsfilecorp.com/files/2178/119791_lion.h2.jpg



Figure 1: Leapfrog generated vertical section looking N showing the outline of current Indicated and Inferred resource for the Tuvatu Au deposit, Fiji. The 500 Zone feeder is illustrated as 4 separate veins/lodes extending for about 300m from the base of the Inferred resource. Red, blue and green lodes trend between N020° and N030°, and are sub-parallel to existing UR2 and UR4 lodes; yellow mesh is oriented approximately N060° and is a linking structure between other lodes. Deeper drill intercepts from holes TUDDH514 and TUDDH494 are also projected onto the section.

To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/2178/119791_43b6e663c4637835_004full.jpg



Figure 2: Schematic longitudinal section showing all pierce points defining the 500 Zone mineralized feeder. Intercepts occur over an approximate 90m thickness but are projected onto the section for illustrative purposes. Yellow dots represent significant mineralization; green dots represent holes that did not intersect significant mineralization at depths represented by this section. Light pink dots are historic drill holes that define a portion of the Inferred resource, the base of which is illustrated by the blue dashed line. The mineralized zone forms an approximately 200m-wide by 90m thick zone that plunges steeply to the NE at approximately -80°. The possible continuity of the zone at depth is suggested by two deep intercepts in holes TUDDH514 and TUDDH494, that returned 10.5 and 12.2 g/t Au, respectively.

To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/2178/119791_43b6e663c4637835_005full.jpg

Table 2: Significant intervals reported in this release (intervals greater than 3.0 g/t Au are red; intervals greater than 9.0 g/t Au or greater than 2.0 m wide are bolded)

Drill Hole From (m) To (m) Interval (m) Au (g/t)
TUG136 (upper part of hole was previously reported) 293.5 293.8 0.3 0.79
308.7 309.3 0.6 1.55
379.3 379.6 0.3 1.05
407.4 409.4 2.0 1.88
410.9 412.7 1.8 2.45
415.6 416.2 0.6 0.9
418.6 418.9 0.3 1.08
421.5 426.7 5.2 4.4
including 421.5 421.8 0.3 30.67
and 422.7 423.0 0.3 12.62
and 424 424.3 0.3 6.17
and 425.7 426.4 0.7 6.32
428.2 432.1 3.9 7.86
including 429.1 432.1 3.0 10.14
which includes 429.4 429.7 0.3 34.56
and also includes 431.5 432.1 0.6 20.13
435.3 435.6 0.3 6.47
445.10 446.6 1.5 87.83
including 445.10 445.7 0.6 108.41
which includes 445.40 445.7 0.3 176.5
and also includes 446.30 446.6 0.3 222
459.00 459.6 0.6 10.17
including 459.00 459.3 0.3 14.86
465.24 466.14 0.9 0.59
477.8 478.1 0.3 1.06
498.7 499.0 0.3 0.68
503.4 503.7 0.3 0.50
506 506.3 0.3 0.69
507.5 507.8 0.3 3.57
537.3 537.6 0.3 13.80
538.6 538.9 0.3 2.38
542.3 542.9 0.6 2.31
Drill Hole From (m) To (m) Interval (m) Au (g/t)
TUG137 (upper part of hole was previously reported) 322.7 323.7 1.0 0.57
337.05 337.35 0.3 1.1
337.65 338.8 1.15 1.1
600.2 600.5 0.3 1.81
690.4 690.7 0.3 0.93
749.4 749.7 0.3 3.36
771.6 773.7 2.1 1.26
780.3 780.6 0.3 0.84
TUG138 4.2 4.5 0.3 1.17
28.5 30.6 2.1 4.55
including 28.8 29.1 0.3 9.67
and 30.0 30.3 0.3 15.28
81.9 83.1 1.2 3.47
95.4 95.7 0.3 0.68
100.2 100.5 0.3 1.14
108.3 115.2 6.9 6.74
including 109.8 112.8 3.0 13.67
which includes 111.3 112.8 1.5 23.03
which includes 111.3 111.6 0.3 37.29
and also includes 112.2 112.5 0.3 29.70
and 114.3 115.2 0.9 2.23
117.3 117.6 0.3 0.94
119.7 120.0 0.3 0.82
153.9 155.1 1.2 0.98
156.9 159.0 2.1 1.90
including 157.2 157.5 0.3 5.99
160.2 162.0 1.8 0.96
178.8 179.4 0.6 6.75
including 178.8 179.1 0.3 11.54
180.9 181.2 0.3 7.38
201.6 201.9 0.3 0.59
211.5 212.4 0.9 10.55
including 211.8 212.4 0.6 15.51
276.9 277.2 0.3 0.72
282.9 285.9 3.0 0.65
305.1 305.7 0.9 7.91
including 305.1 305.4 0.3 15.34
Drill Hole From (m) To (m) Interval (m) Au (g/t)
and 305.4 305.7 0.3 8.19
321.3 321.6 0.3 0.82
341.4 344.7 3.0 7.71
including 341.7 342.9 1.2 9.59
and 343.2 343.8 0.6 11.95
and 344.1 344.4 0.3 7.23
345.0 346.5 1.5 1.12
354.6 357.3 2.7 2.04
385.5 385.8 0.3 0.82
420.0 420.3 0.3 0.54
422.1 423 0.9 0.51
427.5 427.8 0.3 3.08
429.3 429.6 0.3 0.88
431.1 431.4 0.3 0.51
433.2 434.1 0.9 1.93
455.1 455.4 0.3 2.2
459.4 461.5 2.1 2.26
including 460.9 461.2 0.3 5.73
541.5 542.1 0.6 15.21
including 541.5 541.8 0.3 26.45
550.2 551.1 0.9 1.74
561.0 561.3 0.3 114.80
568.2 569.1 0.9 7.29
including 568.5 568.8 0.3 17.00
571.5 574.5 3.0 23.14
including 571.5 571.8 0.3 118.60
including 571.8 572.1 0.3 6.01
including 572.4 572.7 0.3 51.43
including 573.0 573.3 0.3 49.72
638.1 638.4 0.3 0.69
TUDDH525 re-entry 466.6 466.9 0.3 0.95
627.5 629.3 1.8 1.52
including 629 629.3 0.3 4.77
TUDDH561 369.9 370.2 0.3 0.89
374.4 374.7 0.3 3.94
521.4 522.3 0.9 1.56
637.6 639.1 1.5 0.59
705.4 706.3 0.9 1.17
Drill Hole From (m) To (m) Interval (m) Au (g/t)
TUDDH563 13.66 15.7 2.04 3.29
including 13.66 13.96 0.3 20.41
16.83 17.0 0.17 0.7
18.8 19.1 0.3 0.57
21.8 22.4 0.6 5.13
25.2 26.4 1.2 1.58
52.49 52.79 0.3 63.29
58.1 58.5 0.4 6.48
70.38 70.68 0.3 0.63
125.25 125.55 0.3 0.58
164.55 164.85 0.3 68.5
350.82 351.76 0.94 2.18
454.35 455.85 1.5 0.99
481.7 482.85 1.15 1.68
488.9 489.5 0.6 1.68
491.0 491.3 0.3 0.52
790.4 791.16 0.76 1.65
TUDDH571 (upper part of hole was previously reported) 283.5 284.1 0.6 0.99
295.2 298.5 3.3 0.56
307.8 308.4 0.6 0.53
481.8 482.7 0.9 5.23
including 482.1 482.4 0.3 12.46
516.1 516.7 0.6 0.53
518.2 518.8 0.6 0.96
519.4 519.7 0.3 0.63
546.4 546.7 0.3 0.67
548.8 549.1 0.3 0.69
550 552.4 2.4 0.71
559.6 559.9 0.3 0.69
725.2 725.8 0.6 0.63
TUDDH573 (upper part of hole was previously reported) 359.5 360.1 0.6 2.26
433.5 433.8 0.3 1.33
454.3 454.6 0.3 0.72
455.8 460.3 4.5 1.19
including 457.9 458.2 0.3 5.65
and 458.5 458.8 0.3 3.33
Drill Hole From (m) To (m) Interval (m) Au (g/t)
461.5 462.7 1.2 0.96
466.9 467.5 0.6 0.67
484.6 485.2 0.6 0.75
488.2 489.1 0.9 0.96
685.4 685.7 0.3 1.24
714.3 715.5 0.3 0.7
TUDDH573W1 500.6 500.9 0.3 0.61
503.6 504.8 1.2 1.16
578.0 579.8 1.8 0.83
581.0 581.3 0.3 1.03
582.5 585.2 2.7 25.83
including 582.5 582.8 0.3 43.64
and 583.1 583.4 0.3 9.62
and 583.4 584.9 1.5 33.77
which includes 584.3 584.6 0.3 81.77
and 584.6 584.9 0.3 34.41
587.3 587.9 0.6 2.49
623.3 623.6 0.3 0.51
623.6 623.9 0.3 0.8
TUDDH573W2 502.8 503.4 0.6 0.71
505.5 506.7 1.2 0.83
591.9 593.1 1.2 0.69
597.6 598.8 1.2 2.29
683.7 684.0 0.3 0.6
690.9 691.2 0.3 0.51
700.4 700.7 0.3 0.58
772.8 773.4 0.6 0.67
799.8 801 1.2 0.56
TUDDH494 re-entry 913.1 914.0 0.9 1.18
920.3 921.2 0.9 1.64
935.0 935.6 0.6 0.81
969.5 969.8 0.3 0.53
986.6 986.9 0.3 0.73
1051.4 1051.7 0.3 1.69
1082.9 1083.2 0.3 0.53
1102.7 1103.0 0.3 0.61
1106.3 1106.6 0.3 12.19

Table 3: Survey details of diamond drill holes referenced in this release, not previously reported

Hole No Coordinates (Fiji map grid) RL final depth dip azimuth
N E m (TN)
TUG138 3920759 1876458 138.9 764.4 -64 163
TUDDH525 re-entry 3920796 1876351 209.4 698.6 -57 123
TUDDH561 3920931 1876512 235.9 796.1 -58 134
TUDDH571 3920932 1876510 236.1 847.6 -62 147
TUDDH573 3920796 1876350 209.7 779.2 -66 130
TUDDH573W1 3920796 1876350 209.7 787.1 -66 130
TUDDH573W2 3920796 1876350 209.7 863.7 -66 130
TUDDH494 re-entry 3920705 1876220 225.5 1301.6 -67 97

Drilling and Assay Processes and Procedures

The Company is utilizing its own diamond drill rig, using PQ, HQ and ultimately NQ sized drill core rods. Drill core is logged by Company geologists and then is sawn in half and sampled by Lion One staff.

Samples are analyzed at the Company's own geochemical laboratory in Fiji, whilst pulp duplicates of all samples with results >0.5g/t Au are re-assayed, as well as sent to ALS Global Laboratories in Australia for check assay determinations. All samples for all high-grade intercepts reported here will be sent to ALS Global Laboratories for check assays shortly. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10g/t Au are then re-analyzed by gravimetric method. Lion One's laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples sent to ALS Townsville, Queensland, Australia are analyzed by the same methods (Au-AA26, and also Au-GRA22 where applicable). ALS also analyze for 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES. (method ME-ICP61).

Qualified Person

The scientific and technical content of this news release has been reviewed, prepared, and approved by Mr. Sergio Cattalani, P. Geo, who is a qualified person pursuant to National Instrument 43-101 - Standards of disclosure for Mineral Projects ("NI-43-101).

About Tuvatu

The Tuvatu gold deposit is located on the island of Viti Levu in the South Pacific island nation of Fiji. The mineral resource for Tuvatu as disclosed in the technical report "Tuvatu Gold Project PEA", dated June 1, 2015, and prepared by Mining Associates Pty Ltd of Brisbane Qld, and subsequently updated in January 2018 as disclosed in the technical report and PEA by Tetra Tech "Technical Report and Preliminary Economic Assessment Update for the Tuvatu Gold Project, The Republic of Fiji" dated September 2020, comprises 1,007,000 tonnes Indicated at 8.48 g/t Au (274,600 oz. Au) and 1,325,000 tonnes inferred at 9.0 g/t Au (384,000 oz. Au) at a cut-off grade of 3.0 g/t Au. The technical report is available on the Lion One website at www.liononemetals.com and on the SEDAR website at www.sedar.com.

About Lion One Metals Limited

Lion One's flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One's CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.

On behalf of the Board of Directors of
Lion One Metals Ltd.
"Walter Berukoff"
Chairman and CEO

For further information
Contact Investor Relations
Toll Free (North America) Tel: 1-855-805-1250
Email: info@liononemetals.com
Website: www.liononemetals.com

Neither the TSX Venture Exchange nor its Regulation Service Provider accepts responsibility for the adequacy or accuracy of this release.

This press release may contain statements that may be deemed to be "forward-looking statements" within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "proposed", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Ltd.'s current beliefs and is based on information currently available to Lion One Metals Ltd. and on assumptions Lion One Metals Ltd. believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Ltd. or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Ltd., general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Ltd. has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Ltd. does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/119791


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
Lion One Metals Ltd.
Bergbau
A1H6MD
CA5362161047
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"