Suche
 
Folgen Sie uns auf:

Torr Metals Confirms Kilometre-Scale Geophysical Anomalies Coincident with Untested Copper Porphyry Targets at Kolos

24.04.2024  |  Newsfile

Vancouver, April 24, 2024 - Torr Metals Inc. (TSXV: TMET) ("Torr" or the "Company") is very pleased to announce preliminary results that have identified near-surface high priority geophysical resistivity anomalies extending up to >1.5 kilometers (km) depth that are coincident with highly anomalous copper (Cu), gold (Au), and molybdenum (Mo) mineralization at-surface (Figure 1). These compelling exploration drill targets have been identified using a newly completed 3D resistivity inversion voxel model, derived from the ZTEM geophysical survey completed over the entirety of the 100% owned ~140 km2 Kolos Copper-Gold Project in late 2023 (Figure 1).

The geophysical survey data was analyzed in conjunction with recently published soil geochemistry, revealing a multi-centred cluster porphyry trend spanning 7 kilometers (km) (see March 25, 2024 news release). This trend encompasses 5 priority exploration targets for Cu-Au and Cu-Mo that delineate potential porphyry centres, all of which have never been drilled. Each target zone is defined by >200 parts per million (ppm) Cu in soil with concentrations reaching a peaks of 1175 ppm Cu and 725 ppb Au (Figure 1). All of the priority exploration targets are road-accessible from Highway 5, approximately 23 km north-northeast of the city of Merritt, British Columbia.

Highlights:

  • Kilometre-scale Surface Exploration Targets Now Extended to Depth: The results of the 3D resistivity inversions have confirmed multiple untested sub-surface drilling opportunities with 3 major potential porphyry centres within the Lodi, Kirby, and Clapperton Zones together with 2 additional satellite Cu-Au porphyry epithermal targets within the Ace and Rea Zones.

  • Multiple Broad Resistivity Anomalies Indicate Impressive Scale: Across the Lodi, Kirby, and Clapperton Zones, extensive low to moderate and high resistivity anomalies span multiple kilometers in the sub-surface, aligning with concentrated higher-grade Cu ± Au ± Mo mineralization at the surface (Figure 1).

  • Multiple Large-Scale Geophysical Anomalies Coincident with Surface Mineralization:

    • Analysis has confirmed an extensive anomalous resistivity signature, stretching over 4.8 km in strike-length, connecting the Cu-Au Lodi and Kirby Zones at depth (Figure 2). Copper-gold mineralization in both zones has a strong correlation to anomalous low to moderate resistivity, with anomalous signatures extending up to 1000 meters (m) in depth while measuring ~1850 m and ~2500 m in strike-length within the Lodi and Kirby Zones respectively (Figure 2, Figure 3).

    • Anomalous copper-molybdenum in soil coincides with an at-surface high resistivity anomaly at the Clapperton Zone, attributed to an exposed quartz-rich domain, typical of the upper levels of a porphyry system, within a multi-phase diorite intrusive host; resulting in an anomalous geophysical signature measuring ~1400 m in width and >1500 m in depth (Figure 3).

  • Kirby Zone Expansion Potential: The anomalous geophysical signature at the Kirby Zone extends >1900 m south of the 2023 soil grid, suggesting significant expansion potential with further soil sampling.

"The strong correlation between highly anomalous resistivity areas and known surface copper-gold and copper-molybdenum mineralization is incredibly promising," said Malcolm Dorsey, President and CEO. "We are now identifying the robust plumbing behind these prolific mineralizing systems, indicating an immense scale of underlying potential. Torr is now equipped with the precise knowledge on where and how to best target these anomalies in the sub-surface and with multiple untested zones delineated across a 7 km cluster porphyry trend this is a significant opportunity for a potentially major new copper discovery located only 30 km from Canada's largest open pit copper mine at Highland Valley."

ZTEM Geophysical Survey

ZTEM geophysics is a sophisticated technique for delineating expansive hydrothermal mineralization and alteration systems typically associated with porphyry deposits, often spanning kilometer-scale dimensions both horizontally and vertically. Moreover, its precision in defining intricate geological structures proves invaluable, aiding in the identification and localization of mineralization; thereby enhancing exploration efficiency and success.



Figure 1. Kolos Project area with highly anomalous 2023 soil samples and ZTEM resistivity inversion at 200m vertical depth. Note that gaps in the data were caused by powerline disruption and location of Highway 5.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/6794/206619_f59557ea44c5a946_001full.jpg



Figure 2. ZTEM 3D Resistivity Inversion Model voxel slice through the Lodi and Kirby Zones, view looking east-northeast.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/6794/206619_f59557ea44c5a946_002full.jpg


Figure 3. ZTEM 3D Resistivity Inversion Model voxel slice through the Lodi and Clapperton Zones, view looking northwest.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/6794/206619_f59557ea44c5a946_003full.jpg

Quality Assurance and Control

Results from samples were analyzed at ALS Global Laboratories (Geochemistry Division) in Vancouver, Canada (an ISO/IEC 17025:2017 and ISO 9001:2015 accredited facility). A secure chain of custody is maintained in transporting and storing of all samples. At ALS the "B" horizon soil samples underwent screening to 180 microns under the ALS code PREP-41. The samples were digested using Aqua Regia and analyzed via ICP-MS and ICP-AES using a 25g sample aliquot under the ALS code AuME-TL43. The Company follows industry standard procedures for the work carried out on the Kolos Project. Due to the reconnaissance nature of the soil sampling the Company relied on the internal quality assurance quality control ("QA/QC") measures of ALS. Torr Metals detected no significant QA/QC issues during review of the data.

Qualified Person

The technical content of this news release has been reviewed and approved by Michael Dufresne, M.Sc., P.Geol., P.Geo., a consultant to the Company who is a qualified person defined under National Instrument 43-101.

About Torr Metals

Torr Metals is a Vancouver based mineral exploration company focused on defining and developing the substantial exploration potential of the ~140 km2 Kolos Copper-Gold Project, located within the prolific Quesnel Terrane in Central British Columbia. Year-round access is provided by Highway 5, with the project being favourably located 23 km north of the city of Merritt and 286 km by highway from Vancouver, British Columbia. For further details about the Latham Copper-Gold Project, please refer to the Company's website or current geological Technical Report (August 24, 2021) filed on November 25, 2021 under the Company's profile on SEDAR at www.sedar.com.

On behalf of the Board of Directors
Torr Metals Inc.

"Malcolm Dorsey"

Malcolm Dorsey
President, CEO and Director

For further information:
Malcolm Dorsey
Telephone: 236-982-4300
Email: malcolmd@torrmetals.com

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this press release.

Cautionary Statement Regarding Forward-Looking Information

This press release contains "forward-looking information" within the meaning of applicable Canadian securities legislation. Forward-looking information includes, without limitation, statements regarding the use of proceeds from the Company's recently completed financings, and the future plans or prospects of the Company. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking statements are necessarily based upon a number of assumptions that, while considered reasonable by management, are inherently subject to business, market and economic risks, uncertainties and contingencies that may cause actual results, performance or achievements to be materially different from those expressed or implied by forward-looking statements. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information. Other factors which could materially affect such forward-looking information are described in the risk factors in the Company's most recent annual management's discussion and analysis which is available on the Company's profile on SEDAR at www.sedar.com. The Company does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/206619


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
Torr Metals Inc.
Bergbau
A3DAEV
CA8913371073
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"