Suche
 
Folgen Sie uns auf:

Volta Resources extends porphyry copper-gold mineralization at Gongondy, Gaoua Cu-Au project, Burkina Faso

12.12.2012  |  CNW

- Intersects 168.0 meters at 0.57% copper-equivalent -

- And 84.0 meters at 1.01% copper-equivalent -

TSX: VTR

TORONTO, Dec. 12, 2012 /CNW/ - Volta Resources Inc. ("Volta Resources" or the "Company") (TSX: VTR) announces the first results from its recently completed 131 hole, 13,528 metres, reverse circulation (RC) and diamond drilling (DD) program on its Gaoua copper-gold project, located in southern Burkina Faso, West Africa.

The program aimed at testing continuity and extensions, both along strike and laterally, of the known copper-gold mineralization at Gongondy and Dienemera (see Figure 1). Gongondy and Dienemera are two of several copper-gold porphyry targets on the Gaoua Project where sufficient drilling has been undertaken to estimate a maiden NI43-101 compliant resource comprising over 1 million ounces of gold and 720 million pounds of copper (see table 4).

This press release includes the results from 68 holes drilled on the Gongondy prospect, from the southernmost section 1138800N to section 1140800N in the northern part of the prospect. These holes, totalling 8,490m of drilling, comprise respectively 24 DD (5,824m) and 44 RC holes (2,666m).

The results confirm that the Gongondy deposit can be traced continuously along its full strike extent of more than 2 kilometers on the western side of a post-mineralization gabbro intrusive (see Figure 2). The drilling also confirmed the presence of two mineralized centres along a north striking breccia body, (the "northern" and the "southern" blocks), separated by a post-mineralization intrusive gabbro body and by an inferred NW-SE trending fault. The drill holes completed in the Northern part of the Gongondy mineralization are also relatively richer in gold. In addition, the southern drill fences show that the Gongondy deposit can be extended for a further 100m to the south and still remains open (see Figure 2). The results from the holes reported in this press release has the potential to considerably increase the size of the existing resource estimated for the Gongondy deposit (Table 4). Highlights from the current reported holes include:

  • GRC40 :   50.0m @ 0.54 g/t Au and 0.46% Cu (0.83% CuEQ)
  • GRC41 :   38.0m @ 0.48 g/t Au and 0.36% Cu (0.70% CuEQ)
  • GRC64 :   21.0m @ 1.68 g/t Au and 0.12% Cu (1.30% CuEQ)
  • S65GON :   72.0m @ 0.91 g/t Au and 0.48% Cu (1.12% CuEQ)
  • S66GON :   78.0m @ 0.30 g/t Au and 0.29% Cu (0.50% CuEQ)
  • S77GON :   84.0m @ 0.85 g/t Au and 0.42% Cu (1.01% CuEQ)
  • S79GON :   65.0m @ 0.43 g/t Au and 0.23% Cu (0.53% CuEQ)
  • S80GON :   82.0m @ 0.26 g/t Au and 0.24% Cu (0.40% CuEQ)
  • S81GON :     168.0m @ 0.43 g/t Au and 0.27% Cu (0.57% CuEQ)

Kevin Bullock, Volta Resources' CEO said, "These results notably increase the scope of the overall Gaoua Project where we have discovered West Africa's only major copper-gold porphyry deposit. By extending the mineralization we have an opportunity to expand the size of the project to the point where we will be in position to formalize a plan to realize full value for the project while we focus on bringing our flagship Kiaka Project to production."

Volta Resources, with SRK Consulting (UK), is scheduled to complete an updated NI 43-101 compliant resource for the Gaoua Project in early Q1, 2013 incorporating all results from holes drilled to date, including the results reported in this press release.

Results for the holes are highlighted in Table 1 and locations shown in Figure 2. Analyses of the Volta Resources samples were undertaken respectively by fire assay on a 50g charge for gold at the Actlabs Laboratories in Ouagadougou, and by Atomic Absorption for copper at the Actlabs Laboratories in Ancaster/Canada. Volta Resources' sampling and assay procedures included rigorous QA/QC elements that employed the inclusion of certified standards and blanks.

Table 1: Highlights of Copper and Gold Intersections for the Reported Drill Holes

HOLE IDFROM
(m)
TO
(m)
INTERVAL
(m)
CuEQ
(%)
Au
(g/t)
Cu (%)REMARKS
GRC4019.0069.0050.000.830.540.46 
80.00101.0021.000.380.250.211 Cu assay missing,
ENDED IN MINERALIZATION
GRC413.0041.0038.000.700.480.36 
GRC436.0017.0011.000.310.170.19 
GRC4743.0057.0014.000.320.290.11 
GRC502.0022.0020.000.480.630.04 
GRC535.0015.0010.000.350.230.19 
22.0055.0033.000.420.370.16 
GRC599.0021.0012.000.350.320.121 Cu assay missing
GRC6015.0027.0012.000.370.400.09 
GRC6446.0067.0021.001.301.680.12ENDED IN MINERALIZATION
52.0-53.0m = 19.3g/t Au
GRC6917.0052.0035.000.540.510.19ENDED IN MINERALIZATION
S65GON121.00193.0072.001.120.910.48 
200.70214.0013.300.370.320.14 
S66GON19.0045.0026.000.360.160.25core loss = 25.8-26.5m;
28.0-27.3m; 37.2-38.3m
61.00139.0078.000.500.300.29 
S67GON24.0046.0022.000.430.150.32 
62.5077.0014.500.550.190.42 
S68GON97.00112.0015.000.310.150.21 
S69GON209.00255.0046.000.500.300.30 
S70GON84.0099.0015.000.330.430.03 
114.00124.0010.000.330.380.06 
S71GON209.00238.0029.000.520.270.33 
S72GON239.00264.0025.000.560.420.27 
S74GON285.00300.0015.000.410.310.19 
S75GON65.0079.0014.000.310.290.10 
240.00250.0010.000.410.290.20ENDED IN MINERALIZATION
S76GON92.20105.0012.800.330.340.09 
257.00279.0022.000.460.310.24 
290.00328.0038.000.560.280.36ENDED IN MINERALIZATION
S77GON85.00169.0084.001.010.850.42 
364.00399.0035.000.330.200.20 
S78GON71.00100.0029.000.510.270.33 
115.00145.0030.000.720.520.36 
S79GON120.00185.0065.000.530.430.23 
S80GON3.7022.0018.300.380.190.25 
70.00152.0082.000.430.260.24Core loss = 99.9-101.0m;
101.9-102.0m; 117.8-118.2m;
118.9-120.0m; 120.6-121.0m
S81GON62.0074.0012.000.360.250.19 
81.00249.00168.000.570.430.27Core loss = 205.0-205.7m
S84GON40.5059.0018.500.360.270.17 
S85GON134.00160.0026.000.850.530.48 
S86GON202.00212.0010.000.700.680.22 
S87GON197.00210.0013.000.380.300.16 

Table Notes :
1) Intervals are drilled lengths. True width is unknown at this time.
2) Internal dilution (less than 0.3 % CuEQ) has been carried out to a maximum of 5m except for the intervals hole S72GON and S79GON,where the maximum internal dilution (MID) is 6m, and for S80GON where the MID is 7m.
3)  Intersections are based on a 0.3% CuEQ cut-off with no top cut applied.
4)  The intersections listed in the table represent sections of at least 10m@ 0.3% CuEQ.
5)  The intersections represent sections drilled by reverse circulation (RC) and/or core drilling (see Table 3).
6) The RC portions of the drill holes were sampled at 1m intervals. Dry samples were riffle-split to provide 2 kg samples sent to the laboratory. Wet samples were dried in the field, then riffle-split in the same way. The cored portion of the drill holes were sampled at one meter intervals and cut in half using a diamond saw. Half-core is archived at the core storage facility on site while the other half was sent to the laboratory.
7) Where core losses were reported in the mineralized intercepts, the width of the entire mineralized intercept is reported at the weighted average grade of the remaining samples. Where assays are missing a zero value was assigned to the sample.
8)  Samples were sent to Actlabs in Ouagadougou for standard preparation and gold assaying (FA) and to Actlabs in Ancaster/Canada for Cu assaying by atomic absorption spectrometry.
9)  The accuracy of the results was tested through the systematic inclusion of Cu-Au standards and field blanks. Standards were inserted every 15 samples and blanks approximately every 30 samples. The results for the reported holes have passed the Company's QA/QC protocols.
10)  Copper equivalent calculated using US$3.00/lb Cu and US$1400/oz. Au and is not adjusted for mining and metallurgical recoveries as these remain uncertain. The formula used is as follows: CuEQ = Cu% + (Au g/t x 0.7).

Gold-rich intercepts in the reported drill holes which occur outside of the copper-gold mineralized intervals listed in Table 1, are presented below in Table 2.

Table 2: Gold Intersections Not Directly Associated With Copper Mineralization

HOLE IDFROM*
(m)
TO*
(m)
INTERVAL*
(m)
Au (g/t)
GRC3347.0048.001.004.17
GRC398.009.001.004.34
GRC4420.0021.001.002.81
GRC5552.0053.001.002.97
GRC5657.0058.001.002.67
GRC722.003.001.005.72
GRC739.0010.001.003.53
GRC757.008.001.004.85
S68GON138.00139.001.003.54
S69GON110.00111.001.008.61
194.00195.001.005.00
S70GON14.0016.802.802.75
S76GON168.00171.003.004.30
223.00224.001.003.12
S80GON183.00184.001.003.20
S80GON184.00185.001.0013.90
S83GON143.00144.001.004.67
149.00150.001.005.16
S86GON24.0025.001.002.67
S87GON23.0024.001.003.49

* core length-not true width.

Table Notes:

  • The Au intersections above are based on a 0.5g/t Au cut-off with no top cut applied.
  • No sample within the reported intersections includes grades lower than 0.5g/t Au.
  • The intersections listed in the table represent sections of at least 1m @ >2.5g/t Au or 2.5m >1g/t Au .
  • The above assay results were obtained by identical processes as those described for the Cu-Au intervals and the accuracy of the results was tested through the systematic inclusion of Cu-Au standards and field blanks as described in the notes under table 1. The results for the reported holes have passed the Company's QA/QC protocols.

TABLE 3: Collar Coordinates and Orientation Parameters

SECTIONHOLEIDUTM_XUTM_YUTM_ZDEPTH
(m)
DrillTypeDIP
(degrees)
AZIMUTH
(degrees)
1138800NGRC34498723113879830339.0RC-6090
GRC35498774113879830138.0RC-6090
GRC33498676113879930561.0RC-6090
GRC75499119113880029919.0RC-6090
GRC37498875113880130238.0RC-6090
GRC39498971113880129944.0RC-6090
GRC76499277113880129416.0RC-6090
GRC36498825113880229953.0RC-6090
GRC72499050113880230052.0RC-6090
GRC38498924113880330362.0RC-6090
GRC71499022113880330167.0RC-6090
GRC74499098113880329540.0RC-6090
GRC73499077113880429846.0RC-6090
1138950NS67GON4990241138950302198.0DD-6090
S69GON4991241138950302256.1DD-6090
S74GON4987271138951299301.1DD-6090
S68GON4989261138960302193.0DD-6090
1139250NS76GON4987191139250301328.0DD-6090
1139350NS78GON4988221139349308175.0DD-6090
1139450NS80GON4992741139451299201.0DD-6090
S88GON4981501139470313162.0DD-45270
1139550NS79GON4987761139555306202.0DD-6090
1139650NGRC404993331139651308101.0RC-6090
GRC414999385113965130768.0RC-6090
1139700NS81GON4987761139700304250.0DD-6090
1139750NS84GON4988811139750312137.0DD-6090
1139900NS70GON4985981139900308160.0DD-6090
S66GON4989231139900300166.0DD-6090
S71GON4987751139902307298.0DD-6090
1140150NS83GON4986251140148314271.0DD-6090
GRC42499227114014831444.0RC-6090
S82GON4987791140150312300.0DD-6090
GRC70498900114015030852.0RC-6090
GRC474991761140150321100.0RC-6090
GRC43499274114015031546.0RC-6090
GRC44499325114015131654.0RC-6090
GRC45499375114015131840.0RC-6090
GRC46499427114015131740.0RC-6090
S86GON4989511140154312250.5DD-6090
1140300NS87GON4986261140300308266.0DD-6090
1140350NGRC51499374114034831773.0RC-6090
GRC484992261140349321100.0RC-6090
GRC49499275114034932476.0RC-6090
GRC50499323114035031946.0RC-6090
GRC524994231140350319100.0RC-6090
GRC58499476114035032181.0RC-6090
1140400NGRC68498879114039732255.0RC-6090
GRC69498929114039832252.0RC-6090
S73GON498448.841140398.731283.9DD-6090
GRC67498815114039931958.0RC-6090
S72GON4985001140400308302.5DD-6090
S65GON4986271140400309422.7DD-6090
GRC66498780114040031447.0RC-6090
1140600NS85GON4985751140575320250.0DD-6090
S75GON4988791140595323250.0DD-6090
GRC54499272114059832267.0RC-6090
GRC55499325114059832065.0RC-6090
GRC53499224114059932470.0RC-6090
GRC564993731140601325100.0RC-6090
GRC574994241140604323100.0RC-6090
1140701NS77GON4986201140701320400.0DD-6090
1140800NGRC59498776114079931970.0RC-6090
GRC63498973114079932564.0RC-6090
GRC62498926114080032157.0RC-6090
GRC64499025114080032567.0RC-6090
GRC65499075114080032579.0RC-6090
GRC60498829114080131861.0RC-6090
GRC61498877114080132358.0RC-6090


On February 5, 2009, the Company announced an independent NI 43-101 compliant inferred resource estimate for the Gongondy and Dienemera deposits on the Gaoua project (See Volta press release dated February 5 2009). The resource estimate was calculated by SRK Consulting (UK) Ltd. at a 0.45% copper equivalent cut-off grade, the Dienemera and Gongondy deposits host an initial Inferred Resource of 82,600,000 tonnes grading 0.40% copper and 0.40 g/t gold for a total of 724,880,000 lbs of copper and 1,072,900 ounces of gold. The individual resource estimate for each deposit is provided in the table below. Copper Equivalent ("CuEQ") has been calculated from assumed revenues of USD 3,000 per tonne of copper and USD 700 per ounce of gold with metallurgical recovery assumed to be 85% and 70% respectively based on initial QEMSCAN results. Gold grade was multiplied by 0.6 and added to the copper grade to provide CuEQ grade. The cut-off grade further assumed typical costs of USD 2 per tonne for mining and USD 10 per tonne for processing and general administration costs.

Table 4: NI 43-101 compliant Inferred Resource estimate
Calculated by SRK Consulting (UK) Ltd. out of Cardiff, at a 0.45% copper equivalent cut-off grade at Dienemera and Gongondy - see News Release of 5 February 2009).

DEPOSITCut-off GradeTonnageCopperGoldCopper Equivalent
(CuEQ %)(tonnes)%lbsg/tOz%lbs
Dienemera0.4523,000,0000.50255,075,0000.21155,3000.63319,009,000
Gongondy0.4559,600,0000.36469,805,0000.48917,6000.65847,236,000
TOTAL0.4582,600,0000.40724,880,0000.401,072,9000.641,166,245,000



Under the guidelines of National Instrument 43-101, the qualified person for the Gaoua project is Mr. Guy Franceschi, Vice President, Exploration for Volta. Mr. Franceschi is a member of the European Federation of Geologists and has reviewed and approved the contents of this news release.

About Volta Resources:

Volta Resources has a portfolio of quality gold exploration projects in Burkina Faso and Ghana, both mining-friendly West African jurisdictions with proven world-class gold deposits.  VTR will focus on fast-tracking its flagship Kiaka Gold Project (NI-43-101 compliant resources include 117.42 million tonnes @ 1.07 g/t Au for 4,029,000 ounces in the Measured and Indicated categories and 29.96 million tonnes @ 1.00 g/t Au for 1,000,000 ounces in the Inferred category [Please see VTR press release dated March 21, 2012] including 34.38 million tonnes @ 1.04 g/t Au for 1,145,969 ounces of gold in the Proven category and 91.70 million tonnes @ 0.93 g/t Au for 2,742,353 ounces of gold in the Probable category (Please see VTR press release dated May 3, 2012) towards a development decision, aiming to complete a Feasibility Study in Q3, 2013. Recent acquisition of properties around the Kiaka Gold Project has provided VTR with an extensive ground position along the highly prospective Markoye Fault Corridor in an important emerging gold province.

Forward Looking Information Caution:

This press release presents "forward-looking statements" within the meaning of Canadian securities legislation that involve inherent risks and uncertainties.  Forward-looking statements include, but are not limited to, statements with respect to the future price of gold and other minerals and metals, the estimation of mineral reserves and resources, the realization of mineral reserve estimates, the capital expenditures, costs and timing of the resources, the realization of mineral reserve estimates, the capital expenditures, costs and timing of the development of new deposits, success of exploration activities, permitting time lines, currency exchange rate fluctuations, requirements for additional capital, government regulation of mining operations, environmental risks, unanticipated reclamation expenses, title disputes or claims and limitations on insurance coverage.  Generally, these forward-looking statements can be identified by the use of forward looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking statements are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Volta Resources to be materially different from those expressed or implied by such forward looking statements, including but not limited to: risks related to international operations, risks related to the integration of acquisitions; risks related to joint venture operations; actual results of current exploration activities; actual results of current or future reclamation activities; conclusions of economic evaluations; changes in project parameters as plans continue to be refined; future prices of gold and other minerals and metals; possible variations in ore reserves, grade or recovery rates; failure of equipment or processes to operate as anticipated; accidents, labour disputes and other risks of the mining industry; and delays in obtaining governmental approvals or financing or in the completion of development or construction activities.  Although the management and officers of Volta Resources believe that the expectations reflected in such forward-looking statements are based upon reasonable assumptions and have attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.  Volta Resources does not undertake to update any forward-looking statements that are incorporated by reference herein, except in accordance with applicable securities laws.

SOURCE Volta Resources Inc.

Image with caption: "Figure 1: Location of Gaoua Cu-Au Porphyry Prospects (CNW Group/Volta Resources Inc.)". Image available at: http://photos.newswire.ca/images/download/20121212_C8334_PHOTO_EN_21887.jpg

Image with caption: "Figure 2: Current Drilling Highlights From the Gongondy Cu-Au Prospect (CNW Group/Volta Resources Inc.)". Image available at: http://photos.newswire.ca/images/download/20121212_C8334_PHOTO_EN_21888.jpg

For further information, please refer to our website www.Voltaresources.com or contact:

Kevin Bullock, P.Eng., President & CEO      
Tel:  (416) 867-2299              
Fax: (416) 867-2298
Email: kbullock@Voltaresources.com 

or

Andreas Curkovic, Investor Relations 
Tel: (416) 577-9927


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
Volta Resources Inc.
Bergbau
-
-
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"