Atalaya Mining PLC Announces New Resource Estimates: San Dionisio & San Antonio

New Independent Mineral Resource Estimates for San Dionisio and San Antonio

Including Open Pit Zone at San Dionisio With an Estimated Copper Resource Grade That Is ~140% Higher Than Existing Reserves at Cerro Colorado Open Pit

NICOSIA, April 13, 2022 - Atalaya Mining plc ("Atalaya" or "the Company") (AIM:ATYM)(TSX:AYM) is pleased to announce new Mineral Resource Estimates, prepared in accordance with CIM guidelines and disclosure requirements of NI 43-101, for its San Dionisio and San Antonio deposits, which form part of Proyecto Riotinto and are located adjacent to the Company's operating Cerro Colorado open pit and 15 Mtpa plant. The estimates will be included in a new NI 43-101 technical report that is being prepared by Ore Reserves Engineering for the overall Proyecto Riotinto property and which will be published in Q2 2022.

Highlights

• San Dionisio Open Pit resource: west extension of existing Cerro Colorado open pit
  • M&I Resource: 56.1 Mt at 0.91% Cu, 1.14% Zn, 0.23% Pb (0.15% Cu cut-off)
  • Copper resource grade: ~140% higher than existing reserves at Cerro Colorado
• San Dionisio Underground: polymetallic resource located below potential open pit
  • Inferred Resource: 12.4 Mt at 1.01% Cu, 2.54% Zn, 0.62% Pb
• San Antonio Underground: polymetallic resource east of the Cerro Colorado pit
  • Inferred Resource: 11.8 Mt at 1.32% Cu, 1.79% Zn, 0.99% Pb
• Preliminary Economic Assessment ("PEA") is planned during 2022 for an operating schedule that combines Cerro Colorado reserves with higher grade material from the San Dionisio deposit
• Subject to the relocation of certain infrastructure and receipt of final permits, the potential open pit at San Dionisio could begin to deliver material to the Proyecto Riotinto plant by mid to late 2023
  • Could potentially account for approximately one-third of processing capacity, with Cerro Colorado ore providing the remainder
  • San Dionisio contains copper mineralisation that could be processed at the existing plant with minimal modifications
  • Contribution from San Dionisio could potentially provide an uplift to Riotinto copper production by increasing the blended head grade

Alberto Lavandeira, CEO, commented:

"The completion of an independent Mineral Resource Estimate for the San Dionisio deposit is an important milestone for Atalaya. As a result of its location beside Cerro Colorado and its nature as a pit extension, San Dionisio could become a near-term source of feed for the Proyecto Riotinto plant. Its development could provide material that is substantially higher grade than Cerro Colorado's existing reserves, thereby increasing copper production while maintaining current plant processing rates.

Similarly, the new NI 43-101 compliant Mineral Resource Estimate for San Antonio highlights another potential source of higher grade material that could increase production and extend mine life in the Riotinto District. Its proximity to the Riotinto plant and legacy infrastructure are expected to expedite future development and reduce capital intensity."

Proyecto Riotinto Overview

Since its restart in 2015, all mining at Proyecto Riotinto has been conducted from the Cerro Colorado open pit. The other known mineral deposits within the Riotinto concession area - the San Dionisio deposit and the San Antonio deposit - have not been mined by Atalaya.

The San Dionisio deposit is located less than 1 kilometre west of the Cerro Colorado pit, and was historically mined by the Corta Atalaya open pit and the Pozo Alfredo underground mine, which targeted copper-rich stockwork and massive sulphide mineralisation.

The San Antonio deposit is located around 1 kilometre east of the Cerro Colorado pit. It is an eastern extension of the historical Planes deposit, which was mined in the early 20^th century. Mineralisation at San Antonio is characterised mainly by massive sulphides and the deposit is shallow at 150 - 300 metres below surface. In the 1960s and 1970s, an exploration programme at the deposit was undertaken by sinking a shaft, developing two levels and completing 183 drill holes, however, no mining took place. The deposit can be accessed by a ramp collared at the east of the Cerro Colorado pit.

Figure 1: Approximate Locations of Riotinto orebodies (refer to Website announcement)

New Proyecto Riotinto NI 43-101 Technical Report

Ore Reserves Engineering of Lakewood, CO, was retained by Atalaya to prepare a new NI 43-101 technical report for the overall Proyecto Riotinto property, including the Cerro Colorado, San Dionisio and San Antonio deposits.

San Dionisio Mineral Resource Estimation Details

The drilling data used for resource estimation was based on 1,003 drillholes over 83,554 metres, of which 45 holes over 16,991 metres were completed by Atalaya between 2015-2021, while the remainder by past operators.

The Mineral Resource model was created as a three-dimensional block model using Datamine Studio RM software. The model block size is 10x10x10 metres, which is consistent with the estimated mining bench height and the estimated selective mining unit. The horizontal extent of the model is defined to cover the San Dionisio deposit, plus sufficient space outside the deposit to cover the ultimate pit.

San Dionisio Mineral Resource Estimate

Table 1: San Dionisio Open Pit - By Cut-off

Notes: July 2021 Model (21G) - 31 Dec 2020 Topo - $3.60/lb Cu Pit; totals may not sum due to rounding

Table 2: San Dionisio Open Pit - By Ore Type

Notes: July 2021 Model (21G) - 31 Dec 2020 Topo - $3.60/lb Cu Pit; totals may not sum due to rounding

Table 3: San Dionisio Underground

Notes: July 2021 Model (21G); totals may not sum due to rounding

Planned Preliminary Economic Assessment

The new Mineral Resource Estimate for San Dionisio will be used to support a PEA that considers concurrent mining from the Cerro Colorado open pit and the open pit portion of the San Dionisio deposit. Atalaya expects to complete the PEA in 2022.

San Dionisio Conceptual Development Plan

Based on the new Mineral Resource Estimate and prior internal studies, Atalaya believes that the development of the San Dionisio deposit has the potential to create significant value for the Company. The Company will further evaluate the development plan in the PEA.

Mining

The open pit portion of the Mineral Resource at San Dionisio is expected to be mineable by conventional open pit methods, with San Dionisio being an extension of the operating Cerro Colorado open pit. In order to expand the Cerro Colorado pit into the San Dionisio area, the Company would need to relocate the public road, power lines and water lines that currently run between the two deposits. Further dewatering of the historical Atalaya pit would also be required once open pit mining reaches a certain level, similar to how Cerro Colorado was operated.

Mining would be conducted concurrently at San Dionisio and Cerro Colorado, with current expectations that San Dionisio would contribute approximately one-third of existing processing capacity of 15 Mtpa, while Cerro Colorado would account for the remaining two-thirds of ore.

Processing

San Dionisio has two main types of mineralisation - copper and polymetallic. In the initial years of operation, copper-rich material plus approximately 10% high-grade polymetallic material would be mined from the upper zones of the Mineral Resource and processed. According to past metallurgical tests and additional work completed by the Company, it is expected that San Dionisio copper material could be blended with ore from Cerro Colorado and processed at the existing Proyecto Riotinto plant without requiring any major plant modifications.

Upon transitioning to the polymetallic mineralisation, certain modifications to the plant are expected to be required in order to improve copper recoveries and recover zinc and lead. Options include the addition of a conventional differential flotation circuit, and / or the application of the E-LIX System. Atalaya recently approved construction of a Phase I industrial plant that utilises the E-LIX System.

Impact

The contribution by San Dionisio of approximately one-third of future processing feed is expected to provide an uplift to the blended grade at the plant, due to San Dionisio's open pit copper resource grade being approximately 140% higher than Cerro Colorado's existing reserves. This is expected to provide an uplift to copper production at Proyecto Riotinto, even as plant processing capacity is maintained at current levels.

As other deposits in the Riotinto District are developed, such as San Antonio and Proyecto Masa Valverde, further Cerro Colorado ore is expected to be displaced to provide additional capacity for higher grade material.

Permitting

The Company is advancing the various permits and modifications required to develop the San Dionisio deposit and to continue operations at Cerro Colorado, including those related to relocating the public road, power lines and water lines, additional long term tailings capacity and heritage matters.

San Antonio Mineral Resource Estimation Details

The drilling data used for resource estimation was based on 185 drillholes over 18,305 metres, of which 8 holes over 1,504 metres were completed by Atalaya, with the remainder by past operators.

The Mineral Resource model for the mineralised zone of San Antonio was created as a three-dimensional block model using Datamine Studio RM software. The model block size is 2x2x2 metres, which is used to more accurately define the geometry of the deposit. The horizontal extent of the model is defined to cover the San Antonio deposit and the adjacent Planes deposit, plus sufficient space outside the deposit for mine planning.

San Antonio Mineral Resource Estimate

Table 4: San Antonio Underground

Notes: May 2021 Model (21E); totals may not sum due to rounding

San Antonio Conceptual Development Plan

Mining of the San Antonio deposit is likely to be conducted via underground methods. The deposit would be accessed by constructing a ramp collared in the eastern portion of the Cerro Colorado pit that connects to the historical Pozo Rotilio shaft, which could provide the future mine with ventilation and an emergency exit. Due to San Antonio's shallow nature and sub-horizontal shape, the mining methods are expected to be room and pillar and complemented with sublevel open stoping.

In advance of any development decision for San Antonio, the Company will complete additional drilling from surface, including confirmation and infill drilling to upgrade the current Inferred Resources to higher categories, as well as exploration drilling to the east where the deposit is believed to remain open. In addition, metallurgical testwork will be required to confirm recoveries and determine whether conventional differential flotation or the E-LIX System are most suitable.

Qualified Person Statement

The Mineral Resource Estimates for San Dionisio and San Antonio were prepared by Ore Reserves Engineering ("ORE") in accordance with CIM guidelines and with Canadian regulatory requirements set out in National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") under the supervision of Alan Noble, PE of ORE. Mr. Noble is a Qualified Person as defined under NI 43-101 and the AIM Rules and is independent of the Company. Mr. Noble consents to the inclusion of information related to Mineral Resources in this disclosure, in the form and context it appears.

A version of this announcement containing all referenced figures can be found on the Company's website at www.atalayamining.com (the "Website Announcement").

Glossary of Terms

This announcement contains information which, prior to its publication constituted inside information for the purposes of Article 7 of Regulation (EU) No 596/2014.

Contacts:

About Atalaya Mining Plc

Atalaya is an AIM and TSX-listed mining and development group which produces copper concentrates and silver by-product at its wholly owned Proyecto Riotinto site in southwest Spain. Atalaya's current operations include the Cerro Colorado open pit mine and a modern 15 Mtpa processing plant, which has the potential to become a centralised processing hub for ore sourced from its wholly owned regional projects around Riotinto that include Proyecto Masa Valverde and Proyecto Riotinto East. In addition, the Group has a phased, earn-in agreement for up to 80% ownership of Proyecto Touro, a brownfield copper project in the northwest of Spain. For further information, visit www.atalayamining.com

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.

SOURCE: Atalaya Mining plc