Suche
 
Folgen Sie uns auf:

QC Copper Reports 3 Wide Copper Gold Zones of In-Pit Mineralization

24.08.2022  |  CNW

TORONTO, Aug. 24, 2022 - QC Copper and Gold Inc. ("QC Copper" or the "Company") (TSXV: QCCU) (OTCQB: QCCUF) is pleased to report new assay results from its current drill program on the Opemiska Copper-Gold Property.

Highlights of Gap Zone Results Include:

OPM-22-209

0.38% Cu and 0.38 gpt Au over 39.5m (from 86.5m to 126m)

And

0.75% Cu and 1.34 gpt Au over 13.6m (from 198m to 211.6m)



OPM-22-211

0.42% Cu and 0.18 gpt Au over 28.5m (from 51m to 79.5m)

And

0.62% Cu and 0.23 gpt Au over 54.0m (from 234m to 238m)



OPM-22-214

0.36% Cu and 0.23 gpt Au over 42.8m (from 35.2m to 78m)

And

1.49% Cu and 1.29 gpt Au over 3.5m (from 120m to 123.5m)

Holes 209, 211, and 214, were drilled in the Gap Zone between Vein #1 and Vein #3 and include Vein #2. These holes intersected wide zones of copper/gold mineralization that are present as stacked zones and each hole successfully traversed open stopes and therefore do not include the high-grade mined-out vein material but only their lower-grade envelopes. Other unnamed veins, too narrow for underground mining, were also encountered. As a result, much of the material reported here was not included in Opemiska's 2021 Mineral Resource Estimate ("MRE"). The Gap Zone is in the Starter Pit area that demonstrated higher grades and lessor strip ratio in the MRE.

Click here to view cross sections and plan view of reported intesections.

Summary of reported composite intersections: Table 1

Hole ID

UTM
Coordinates

(East/North)

From
(m)

To
(m)

Interv
al
(m)

Grade

Copper
(%)

Gold
(gpt)

Silver
(gpt)

Zinc
(ppm)

Cobalt
(ppm)

OPM-22-209

509775 /
5515040

60

73.5

13.5

0.567

0.251

2.71

50

34

OPM-22-209

86.5

126

39.5

0.378

0.38

2.37

47

33

OPM-22-209

146.2

162

15.8

0.398

0.306

5.17

631

50

OPM-22-209

198

211.6

13.6

0.747

1.336

4.64

96

51

OPM-22-209

262.5

273

10.5

0.14

0.125

0.84

72

31

OPM-22-211

509725 /
5515066

6

13

7

0.375

0.094

1.09

51

30

OPM-22-211

24

33

9

0.722

0.297

2.99

54

31

OPM-22-211

51

79.5

28.5

0.417

0.18

2.01

87

34

OPM-22-211

133.5

142.5

9

0.182

0.094

1.5

37

44

OPM-22-211

159.8

181.5

21.7

0.154

0.125

2.03

952

32

OPM-22-211

234

288

54

0.619

0.229

3.38

370

59

OPM-22-211

336

351

15

0.269

0.12

1.27

59

35

OPM-22-214*

50972 /
5515000

10.5

18

7.5

0.155

0.058

0.94

54

25

OPM-22-214

35.24

78

42.76

0.358

0.228

2.96

489

35

OPM-22-214

120

123.5

3.5

1.492

1.29

17.38

20677

68

OPM-22-214

163.5

172.5

9

0.266

0.081

1.5

103

36

*

Results pending for end of hole OPM-22-214 which was drilled to 334.5 metres.

Change in Assay Reporting Format

QC Copper will be switching its assay reporting format from copper equivalent grades individual metal concentrations. The Company believes this format more accurately reflects the true metal content as it avoids variable and subjective inputs like the price of metal and foreign exchange calculations.

QP Statement

The technical information contained in this news release has been reviewed and approved by Charles Beaudry, P.Geo and géo., Director and Vice President Exploration for QC Copper & Gold, a Qualified Person, as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects." For the exploration undertaken by QC Copper & Gold, all assay batches are accompanied by rigorous Quality Assurance procedures that include the insertion of standards and blanks and verification assays in a secondary laboratory. All the core received from the drill is split in half, bagged and sent to ALS-Global facilities in Quevillon, Quebec for sample preparation and then the pulps are shipped to AlS-Global's Vancouver laboratory or some other location in the world for analysis using ALS-Global's standardized ISO-compliant methods, all of which are listed in the laboratory certificates provided with the assay results. The remaining half core along with the rejects and the pulps returned from the laboratory are securely stored at QC Copper's facilities in Chapais, Quebec. Quality Control results, including the laboratory's control samples, are evaluated immediately on reception of batch results and corrections implemented immediately if necessary. All drill collars are surveyed and positioned in UTM coordinates. Collars are oriented using a gyroscopic north-finding system and downhole deviations surveys are done with a single-shot gyroscopic instrument at 30 to 50m intervals. For veins oriented approximately east-west and dipping towards the north, and drill holes oriented due south and plunging between 50 and 65 dips, the true width of mineralized intersections are equal or greater than 80% of the quoted core length composite intervals. This observation also holds for veins oriented northwest-southeast and dipping towards the northeast with holes drilled towards the southwest at 225 degrees with dips between 50 and 65 degrees. However for other drill hole orientations relative to these veins or other less common vein orientations, the true widths of mineralized intersections are less.

For information and updates on QC Copper and Gold, please visit: www.qccopper.com

And please follow us on Twitter @qccoppergold

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Certain information in this press release may contain forward-looking statements. This information is based on current expectations that are subject to significant risks and uncertainties that are difficult to predict. Actual results might differ materially from results suggested in any forward-looking statements. QC Copper and Gold Inc. assumes no obligation to update the forward-looking statements, or to update the reasons why actual results could differ from those reflected in the forward looking-statements unless and until required by securities laws applicable to QC Copper and Gold Inc. Additional information identifying risks and uncertainties is contained in filings by QC Copper and Gold Inc. with Canadian securities regulators, which filings are available under QC Copper and Gold Inc. profile at www.sedar.com.

SOURCE QC Copper and Gold Inc.



Contact
To speak to the Company directly, please contact: Stephen Stewart, Chief Executive Officer, Phone: 416.644.1571, Email: sstewart@qccopper.com
Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
QC Copper and Gold Inc.
Bergbau
A2QDW7
CA74738B1094
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"